What does the TV's nameplate say? If it says 120v/60Hz it is designed for use on the US/Canada power system, and will only work in countries elsewhere in the world which use that same system. If it says 240v/50Hz it is designed for use on the European power system and will only work in countries elsewhere in the world which use that same system. If it says 120/240v 50/60Hz it can be used on either. Keep in mind as well that if the TV is meant for 50Hz instead of 60Hz, it may be a PAL (European standard) video type instead of NTSC (American standard), so that may be a problem also. <><><> For more information on the different voltages, frequencies and plugs used around the world see the answer to the Related Question shown below and its Related Links .
If a bulb has 50 Hz frequency and it's supply is 60 Hz frequency, it will still glow, despite the allowance of 10 HZ frequency.
It is a motor where the frequency of the AC voltage is 50 cycles per second. In U.S.A. 60 Hz is standard. 50 Hz would be overseas.
60Hz frequency on 50 Hz motor will create more resistance in its coils. Will cause electromagnetic force trying to increase the speed of the rotor by about 20 %. Less current will flow but the torque will be less, because of the increased resistance of the coils. Usually if the motor is not loaded much it will work fine on 60 Hz. One solution if there is problem running the motor is to remove part of the all coils equally from all of the bobbins by 10-20% .CommentThe resistance of the coils will remain unchanged, however, their inductive reactance will increase -thus reducing the current.
240 V @ 50 Hz (US and Canada are 120 V @ 60 Hz)
The frequency is dependant upon what electrical grid that you are connecting the transformerto. If you are connected to a 50 Hz grid, the transformer will output a voltage at 50 Hz. The same thing with the 60 Hz grid, the transformer will output a voltage at 60 Hz.
There is no inherent disadvantage of 50 Hz compared with 60 Hz, bearing in mind that systems that run at 50 Hz are designed to run at 50 Hz.
Generally speaking, an isolation transformer will work pretty much the same for 50 Hertz as for 60 Hertz. There will be some slight differences, but the frequency is low enough and the the range narrow enough that the transformer will just "do its thing" regardless. Note that the isolation transformer won't change the frequency of the input. An input of 50 Hz or 60 Hz will yield an output of 50 Hz and 60 Hz respectively. No change should be expected.
No it would not.
10 Hz 10 Hz
the maximum rating is 60 hz . it is work in50hz
No, a device designed to work on 50 Hz/60 Hz at 120 VAC will not work on 220 VAC without a voltage converter or transformer. The difference in voltage can damage the device and may not function properly. Always ensure that the device is compatible with the voltage and frequency of the power supply before connecting it.
If a bulb has 50 Hz frequency and it's supply is 60 Hz frequency, it will still glow, despite the allowance of 10 HZ frequency.
In North America 60 Hertz. Europe 50 Hertz.
It is a motor where the frequency of the AC voltage is 50 cycles per second. In U.S.A. 60 Hz is standard. 50 Hz would be overseas.
yes if it's rated for 110-220 V and 50-60 Hz
60 Hz in North America, 50 Hz in Europe.
No. You will probably burn out your charger by subjecting it to nearly twice its rated voltage!