0
What else can I help you with?
You want to replace old lead pipe connected to cast iron sewer pipe with copper How do you connect the copper pipe to the old lead pipe or to the cast iron pipe?
When I have to connect copper to lead "D" I usually solder the copper to the lead or wipe a lead joint depending on the diameter To connect copper to cast iron ,.... If there is a hub I caulk the copper directly into the CI with oakum and poured lead (molten) OR one can solder / braze a female adapter fitting and screw the copper into a CI female fitting
How do you connect Copper pipe to PVC?
You can often find a modern connector such as Sharkbite or Qwest fitting to do this.
How do you connect copper pipe?
YOU thread or braze copper pipe Copper tubling you solder, braze, flaire, compression ring, mechincal joints
What joint is used to joint copper pipe underground?
The same that is used above ground. Sweat fitting coupler. I would not use copper underground in an area that has winter.
What is Id versus od size in copper fittings?
id means inside diameter, od means outside diameter, copper pipe and tubing is measured by the od, therefore the od the pipe or tubing will be the same as the id of the fitting
What is a sweat inlet?
It is probably referring to the type of fitting. A fitting that is soldered to a copper pipe. It is called sweating when you use solder and a torch to connect copper pipe together or attach fittings to copper pipe.
What fitting is required to join copper with galvanized pipe?
A threaded copper fitting on the copper side, male or female, and the galvanized is screwed into it.
Can you connect chromed steel pipe directly to copper or do you need a brass fitting between?
In order to connect a chromed steel pipe to a copper pipe, you will need a brass fitting. These two pipes will not fit into each other otherwise.
You want to replace old lead pipe connected to cast iron sewer pipe with copper How do you connect the copper pipe to the old lead pipe or to the cast iron pipe?
When I have to connect copper to lead "D" I usually solder the copper to the lead or wipe a lead joint depending on the diameter To connect copper to cast iron ,.... If there is a hub I caulk the copper directly into the CI with oakum and poured lead (molten) OR one can solder / braze a female adapter fitting and screw the copper into a CI female fitting
How do you connect Copper pipe to PVC?
You can often find a modern connector such as Sharkbite or Qwest fitting to do this.
How do you connect flex pipe to a copper tubing?
You use a compression fitting or something like a Sharkbite.
How do you connect copper propane pipe and shutoff valve?
To connect a copper propane pipe to a shutoff valve, you will need to use a threaded fitting that matches the size and type of the pipe and valve. Apply pipe dope or Teflon tape to the threads before connecting them. Tighten the fitting securely using a wrench or pliers to create a leak-proof connection.
How can I fix a leaking copper pipe without soldering?
You can fix a leaking copper pipe without soldering by using a compression fitting or a push-to-connect fitting. These fittings can be easily installed without the need for soldering equipment.
How can I connect copper to PEX pipes?
To connect copper to PEX pipes, you can use a fitting called a PEX-to-copper adapter. This adapter typically has a PEX side that can be crimped onto the PEX pipe and a copper side that can be soldered or connected using a compression fitting to the copper pipe. Make sure to follow the manufacturer's instructions and use the appropriate tools for a secure and leak-free connection.
How can I connect PEX pipe to copper in a plumbing system?
To connect PEX pipe to copper in a plumbing system, you can use a push-to-connect fitting or a compression fitting specifically designed for this purpose. These fittings allow for a secure and watertight connection between the two types of pipes. Make sure to follow the manufacturer's instructions carefully for proper installation.
Does galvanized pipe connect to a shark bite?
Male or female sharkbite adapter on threaded end of galvanized pipe or fitting. No other way.
What fitting will be used to connect the water service pipe to feed pipe for the house?
Water main coming into house usually 3/4" K copper pipe. Depending on local plumbing code, fitting usually is flared or soldered.
