The camshaft sensor on a 1997 Volvo 960 is located near the front of the engine, typically on the cylinder head. It's positioned near the camshaft and can be accessed by removing any necessary components for better visibility. If you have trouble locating it, consulting the vehicle's service manual can provide specific diagrams and further details.
take off the tray covering the bottom of the engine and its at the front
The cylinder order for a 1997 Volvo 960, which has a straight-six engine, is 1-5-3-6-2-4. This means that the cylinders are numbered from the front to the back of the engine, starting with cylinder 1 at the front on the driver's side. The firing order is crucial for engine performance and timing.
I have 1993 Volvo 960 and the coolant senor is located on the back of the block ( next to fire wall) The access is very difficult because the are two water hoses and some electrical wires right next to it.
In a 1994 Volvo 960, the speed sensor is typically located on the transmission. It is mounted on the side of the transmission housing, near the output shaft. This sensor is responsible for sending vehicle speed information to the engine control unit and the speedometer. If you're having issues, it's a good idea to inspect the wiring and connections related to the sensor as well.
Yes, the transmissions are compatible. The S90 was the re-branding of the 960 until 1998 or 1999.
Built in in the hazard light switch.
Round and Round
On a 1997 Volvo 960, the automatic transmission (AT) dipstick is located on the passenger side of the engine bay, near the back. It is usually marked with a yellow or orange handle for easy identification. To check the transmission fluid level, ensure the engine is warm, and the vehicle is on a level surface before pulling out the dipstick.
two on before the catalytic and one after
To view the engine compartment of a 1997 Volvo 960, open the hood by pulling the release lever inside the vehicle and then lifting the hood until it locks in place. The engine compartment typically houses the inline-six engine, along with essential components like the battery, coolant reservoir, and air intake. Ensure the engine is cool before inspecting for any maintenance needs or fluid levels. Always refer to the owner’s manual for specific details about components and maintenance procedures.
2.9 litre straight 6 cylinder