To remove the front seat from a 1993 Mercury Cougar, first, slide the seat all the way forward to access the rear bolts. Use a socket wrench to remove the bolts at the rear of the seat, then slide the seat back to access and remove the front bolts. Disconnect any electrical connectors for seat adjustments if applicable. Finally, lift the seat out of the vehicle carefully.
how do you change a water pump on 1993 Mercury Cougar
A 1993 Mercury Cougar takes ( DOT 3 brake fliud )
What type of freon does a 1993 cougar use
Remove the tire and wheel from your 1993 Mercury Cougar. Remove the ball joint retaining nut. Pound the ball joint out with a hammer. Reverse the process to install your new ball joint.
In the trunk
To remove the door panel on a 1993 Mercury Cougar XR7, the first thing to do is to remove the lens covers from any lights in the door. The unscrew the light fixtures from the door. The door panel is attached by the use of clips. With a little nudging with a flat object, such as a screw driver, the clips will pop free of the metal.
Remove the wheel from your 1993 Mercury Cougar. Loosen and remove the wheel bearing nuts. Remove the wheel seal and the wheel bearing. Reverse the process to install your new wheel bearing.
Just like all automatic transmission cars, remove the oil pan.
embedded with alternator
the orignial price was $17,890
ok
.040 ========================================================== According to one of Fords websites : For a 1993 Mercury Cougar : The 3.8 liter V6 engine and the 5.0 , V8 have spark plugs gapped at : ( .054 inch )