How do you disable the alarm system on a 1998 yukok
with the ignition on, hold the unlock switch for 10 sec. you should hear chirp
The factory alarm is built into the Body Computer. It is not possible to unhook it.
The alarm is controlled by the engine and body computers, there isn't an individual fuse.
if you have a hatch back you can deactivate alarm system by placing key in hatch back and simply openning door
To reset the alarm system on a 1998 Isuzu Rodeo, first ensure that the vehicle's ignition is turned off. Then, disconnect the battery for about 10 minutes to reset the system. Reconnect the battery, and the alarm should be reset. If the alarm continues to trigger, check the owner's manual for additional troubleshooting steps or consider consulting a professional.
Removing the fuse will be the easiest way to bypass the 1998 VW Jetta factory alarm system. The alarm fuse location can be found on the inside cover of the fuse box.
To unhook a factory alarm system look for the alarm brain on the dash and Cut the two red and blue wires. Reconnect the wires and the alarm will be reset it self.
I believe you have to take it to a Jeep dealership & they can program it. If you keep pressing the unlock button on your key fob (about four times) it will start chirping. The same for locking.
You must take it to the dealer. They will plug in the computer and reset the parameters for that function. Chek a couple different dealers. Some will charge to do it, others will not. If they want more business from you, they won't.
How do I disengage my security system for a 1998 town and country with out a key
You can not disable the factory alarm. It is built in as part of the computers. If it is a aftermarket alarm you should be able to remove it and put the car back stock.