To adjust the valve on a 1986 Porsche 944, first, ensure the engine is cold and remove the valve cover. Then, using a feeler gauge, measure the gap between the rocker arm and the valve stem for each cylinder. Adjust the gap by turning the adjusting screw on the rocker arm until the feeler gauge fits snugly, maintaining the specified clearance (typically around 0.008 inches for intake and 0.010 inches for exhaust). Finally, recheck the adjustments and reassemble the valve cover.
the turbo was $29,500. the 944 was just under 20k for the 1981 model, so im guessing 22-24k for the base in '86
What is stock adjustments on 86 lt250r
The PCV sits in a rubber grommet in the top of the valve cover.
The head office of Porsche (China) Motors Ltd. is located in Shanghai. Their information is;Porsche (China) Motors Ltd.3/F, 1215-1217 Dong Fang Road,Pudong, Shanghai,P.R. China 200127Tel: +86 21 61565 911Fax: +86 21 61682 911E-mail: [mailto:info@porsche.cn info@porsche.cn]
Adjust valve clearance Intake COLD 0.21mm (0.008)in HOT 0.30mm (0.012)in Exhaust COLD 0.23mm (0.009)in HOT 0.30mm (0.012)in HOT = engine warmed up to normal operating temp. COLD = engine at ambient temp.
The PCV Valve is usually located on the valve cove, driver or passenger side, towards the front of the car.
.07mm or .003 inches cold.
Usually it vents from the valve cover.
for a 86-1/2 to 92 supra, the expansion valve is located in the evaporator case. mike b.
sorry misread the ? its either at the carb. or on the bottom drivers side of the trany after you c it ull now how to adjust
there is a nob on the carb just play with it until you get it adjusted
basically it is the distributor. public library usually has books to help