0
Add your answer:
Earn +20 pts
When replacing the valve cover gasket on a 2004 jeep grand Cherokee limited- 6-cylinder 4.0L what is the correct torque or sequence for tightening the screws on the valve cover?
The correct torque spec is 85 INCH lbs.
Is spectacular single?
spec is single and sexy no one can have him only my friend can have him if u hatin get over it.
What is the front wheel bearing torque spec for 1996 grand Cherokee?
It is 175 ft lbs for the front wheel bearing of a grand cherokee
What is proper oil pressure for 2001 jeep grand Cherokee with 4.0?
Minimum spec at a warm idle is about 12psi. Normal is about 30 at idle. Should go 40-60 at 3000 rpm.
Who Buys Old 1960's Albums?
The following link provides a wealth of information for vinyl album sellers and collectors including databases, pricing guides, messageboards and want to sell/buy boards: http://www.moremusic.co.uk/links/uk_res.htm#spec
What is the torque spec a 1997 Saturn valve cover?
SOHC motor (T45 torx bit) 89 in-lbs DOHC motor (10mm bolts) 22 FT-lbs
What is the rocker arm lash spec for 3.8 ford motor?
There is no valve adjustment on this engine. You tighten the rocker arms in 2 stages. First stage, 44 in lbs. Second stage, 26 ft lbs. If you have valve clatter, you have worn valve train parts.
What is the valve clearance on a vl 250 intruder?
intruder lc 250 valve clarance spec place
What does valve timing 0.006 mean on a camshaft spec card?
It is the "Advertised duration", used by the factory. It is the Valve timing from when the valve is .006inches off the valve seat to .006" off the valve seat.
What is the torque spec on the valve cover for a Hyundai accent 1.5?
72in-lbs
What is the torque spec for Chrysler 518 transmission valve body?
100 in lbs
What is the valve spec for 96 Honda foreman 400?
.006 for intake and exhaust
What is valve lash adjustment spec on 1992 Toyota Land Cruiser L6?
valve lash should be set at 30 thou
What is the valve cover torque spec for a 1998 Hyundai Elantra?
The valve cover bolts need to be torqued to 72 to 84 IN-LBS
What is the Valve lash spec 1987 accord dx?
0.15mm intake 0.25mm exhaust
What year motor is gm 10066036?
1968-69 / 350cui
What is the torque spec for valve covers of a 2.5L Mitsubishi?
whats a head bolt torque of l300diesel2000
