figure it out yourself
P.S. I was never here
The switch will have an "A" position for auto.
It's usually just two screws, under the dash, just above the brake pedal. Remove the switch and plug the electrical connectors in to the new switch then adjust the new switch so that it comes on when the pedal is pressed.
Set your light switch to "auto" on the dash and your lights will come on automatically with the ignition. Turn your light switch on your dashboard to "auto" or "automatic" and the lights will come on and off with your ignition switch.
the flasher is integral within the hazard switch in the dash
Try under the dash near the glove box.
the HEATER CORE can be removed by removing the dash. how do i ghange the dash
If your Trailblazer is a 4x4 the switch should be to the left of the radio on the dash.
Change blower fan control switch in the dash
behind back top of brake pedal under dash.
It should. If there is a switch on the dash or shifter lever that is labeled OD off, you will know for sure.It should. If there is a switch on the dash or shifter lever that is labeled OD off, you will know for sure.
In a 1997 Lincoln Continental : To the right of your headlight switch in the dash is a ( panel dim ) switch I believe if that is turned all the way up then the interior lights will come on
Assuming the bulbs are good, the dash illumination light brightness control switch is turned off or broken.