After opening up the bonnet look behind the headlight unit and you'll see a rubber cover , pull this off and then you'll see the back of the headlight unit across this there will be two metal clips, just unhook these and the unit will come out with the bulb. You just have to pull the bulb out and then replace it with the new one , then
put it back in and clipping the metal clips in to hold the bulb in place.
how do i change a parking light bulb on a 2003 hyunadi accent
shutup
how do you replace the bulb of a volvo v70xc 2001 side mirror?
cant change bulb will need to change the the light as well get one from scrapyard will cost about £5
you take out the old bulb and put a new one in. hope this helps.
how do you change a front turnsignal lightbulb on a 2003 monti Carlo
My o/s parking lamp will not light, but, the indicator light is on instead, where do i change the bulb and how do i do this? BMW x5 2003
To change the ashtray light bulb in a 1999 Volvo S70, first remove the ashtray from its compartment by pulling it out. Then, locate the small bulb holder at the bottom of the ashtray; twist it counterclockwise to remove it. Replace the old bulb with a new one of the same type, reinsert the bulb holder, and slide the ashtray back into its compartment. Ensure the new bulb is functioning by turning on the car's interior lights.
Not to be unkind - but READ THE MANUAL.
The brake light can be access through the trunk compartment. Take hold of the light bulb connector, turn and push in at the same time.
This usually means there is a bulb out, there is a bulb failing or there is a bulb that is not seated properly. Check the bulbs in the tail lights especially (there are a lot of them and you may not notice if one is out).
To change the brake light bulb in a 2003 Alero, first, open the trunk and locate the tail light assembly. Remove the screws or clips securing the tail light, then gently pull the assembly out. Twist the bulb socket counterclockwise to remove it, replace the old bulb with a new one, and reassemble by reversing the steps. Ensure the new bulb is securely in place before closing the tail light assembly.