To change the windscreen wiper arm on a Peugeot 106, first ensure the wipers are off and in the resting position. Lift the wiper arm away from the windscreen, then locate the release tab or nut securing the wiper arm to the spindle. If it's a nut, use the appropriate socket to remove it; if it’s a tab, press it to release the arm. Finally, fit the new wiper arm onto the spindle, ensuring it's securely attached, and lower it back onto the windscreen.
Twist the end of you windscreen wiper stalk away from you..
the relay is in behind the glove compartment behind a rubber flap,beside the enternal fuse box,orange in colour.
On a Peugeot 106 Quicksilver, the windscreen wiper relay is typically located in the fuse box, which is usually found under the dashboard on the driver's side. You may need to consult the vehicle's manual for the exact position of the relay within the fuse box, as it can vary by model year. If you're unable to locate it, checking the wiring diagram for your specific model can also be helpful.
turn wiper stalk
Yes!
If it's anything like mine you should find it just underneath the windscreen wiper areaAnd if its anything like mine, pug 106 Zest XN, it doesn't have a MAP sensor. ;)
On a Peugeot 106 from the P plate era, the rear windscreen washer pump is typically located at the rear of the vehicle, often mounted near the rear wiper motor or within the tailgate area. To access it, you may need to remove any covering panels in the tailgate. Always consult the vehicle's service manual for specific instructions and diagrams for your model.
Either the fuel tank or the windscreen washer receptical. Either way, depends what you want as a result!!!
How do you change a shock on a Peugeot 106 gti
Go to a garage
Yes
80k