Rocker assembly 135ftlbs rocker box or housing is 35ftlbs
Remove a rocker cover and measure one.
Remove the valve cover. The rocker arm assembly can be removed by loosening the rocker arm screws. Each rocker arm will have a screw.
To replace the rocker cover gasket on a 1995 Ford Laser LXi, first, ensure the engine is cool and disconnect the battery. Remove the bolts securing the rocker cover and gently lift it off, taking care not to damage any components. Clean the mating surfaces thoroughly and place the new gasket onto the rocker cover. Reinstall the rocker cover, tighten the bolts to the specified torque, and reconnect the battery.
Subject: Sportster 1200 rear rocker coverQuestionI've replaced my front rocker cover gaskets due to an oil leak. Now I can't get the rear rocker cover off. I've removed the top bolts but the frame is blocking the removal of the cover. Is there an easy way to remove the covers?AnswerSorry I didnt answer you sooner. My hard drive decided to go south!The rocker cover will come off without removing the motor. Its a tight fit and you have to turn it to get it out, but it will come out. If you are removing the lower rocker cover you have to remove the pushrods to get it out.Good luck and happy ridingMike
To change the rocker cover gasket on a Peugeot 206, first, ensure the engine is cool and disconnect the battery. Remove the necessary components, such as the air intake and any electrical connectors, to access the rocker cover. Unscrew the rocker cover bolts and gently lift off the cover, then clean the mating surfaces thoroughly. Place the new gasket in position, reassemble the rocker cover, and tighten the bolts to the specified torque. Finally, reconnect any components you detached and check for leaks after starting the engine.
in the rocker cover
They are under the rocker cover. You'll need to replace the rocker cover seal aswel if your replacing the glow plugs.
you have to cut out the fuel cells because they are partially attached to the rocker cover gasket but that will not completely remove it you also have to remove the radiator and then the rocker cover gasket will be suspended in the air. You then have to cut the cords and the gasket will fall to the ground. And the rest is pretty simple.
your problem is the rocker/engine cover is blocked the only way to fix the problem is to change the rocker/engine cover.
10mm
on the rocker cover