If you can remove the fan first it makes it easier, you need to know how to use a fan spanner. Otherwise you still can do it, you need a long 15mm spanner to release the tention on the belt by the tensioner, then you can remove and replace the belt.
How do you install an alternator belt on a 1986 GMC s15 pickup truck
Begin by removing the alternator tensioner bolt. Slide the alternator to the left. Remove the alternator belt. Reverse the process to install the new alternator belt.
Loosen the tensioner pulley. The alternator belt will become loose. Take off the belt. Remove the wiring harness from the alternator. Remove the retaining bolts from the alternator. Remove the alternator. Reverse the process to install the new alternator.
Remove the alternator wiring harness. Loosen the tensioner pulley. Remove the alternator belt. Remove the alternator retaining bolts. Reverse the process to install the new alternator.
The 1995 Land Rover Discovery has a timing chain.
Disconnect the 1991 Regal battery. Remove the alternator belt and wiring. Unbolt the alternator and install the new one. Reconnect the wires, install the belt, then reconnect the battery.
You have to install a new belt tensioner.
Follow the instructions on Youtube.
Remove the belt from the alternator. The belt can be removed by loosening the belt tensioner. Remove the wiring harness from the alternator. Remove the cables from the alternator. Remove the retaining bolts. Reverse the process to install the new alternator.
To change the fan belt on a Land Rover Discovery 200 TDI, first, ensure the engine is off and cool. Release tension from the belt by using a wrench to turn the tensioner pulley, then remove the old belt from the pulleys. Install the new belt by following the correct routing path indicated in the vehicle's manual, ensuring it sits properly on all pulleys. Finally, reapply tension to the belt before starting the engine to check for proper alignment and function.
Loosen the alternator belt with the tensioner pulley. Remove the alternator belt. Remove the wiring harness. Remove the alternator retaining bolts. Reverse the process to install the new alternator.
loosen the alternator bolts up and push down on the alternator and take the old belt off and reinstall new belt over the pulleys and pry up on the alternator until you get about a 1/2" play in the belt when you push down on the belt and then tighten all the alternator bolts.