Where is the bonnet release on the 3008
I read in Haynes Peugeot 106 Modifying Manual that you find the paint code on the passenger outside (I think near the window) or lift the bonnet up and the code should be at the top of the bonnet (when open) Hannah
The bonnet release lever is at the foot of the front passenger.
open passenger door... look at side of the metal runner on passenger seat small flap.. open.. theres the bonnet release
have you tried getting sum 1 to push dawn on the bonnet and puling the lever ??
With a crowbar
To open the bonnet of a Peugeot 107, first, locate the interior bonnet release lever, which is usually found on the driver's side, near the footwell. Pull the lever to disengage the bonnet latch. Next, go to the front of the car, and gently lift the bonnet while pushing the safety catch (usually located in the center) to fully open it. Finally, secure the bonnet with the prop rod if necessary.
The bonnet release lever on a Peugeot 107 is typically located inside the vehicle, on the driver's side. You can find it near the footwell, just to the left of the driver's seat, often labeled with a symbol of a car with an open bonnet. Pulling this lever will release the bonnet latch, allowing you to open the bonnet from the front of the car.
the bonnet release lever on my 1991 205 is underneath the glovebox on the side by the door, and when the bonnet pops open, there is a small catch roughly in the centre, push it up (towards the bonnet) and pull the bonnet open.
i have seen pug on a saxo so i think if u mod the lights on the mk2 saxo bonnet it will fit :)
Hard to find - but on under the glovebox, tucked away
To open the bonnet of a Peugeot 307, first, locate the interior bonnet release lever, which is typically found on the driver's side, near the footwell or under the dashboard. Pull the lever to release the bonnet latch. Then, walk to the front of the car, lift the bonnet slightly, and locate the secondary catch under the center of the bonnet. Push this catch to fully lift the bonnet and secure it with the prop rod if needed.