Hope u got he correct code1.Switch on the radio 2. 1000 will be displayed. 3 Use button 1 to enter the first number of the code ( eg if code = 0594 then press 1 till you get to 0, then 2 till you get to 5, 3 till 9, 4 till 4 then press and cd forward skip button for more than 4 seconds. NB if the radio displays safe2 leave the radio on for at least an hour without switching ignition on or off if you interrupt the power to the radio the count down starts from the beginning. Good luck
In order to reset the radio code for VW Beta 3 radio,you will need to know the make and model of the vehicle. You can call your local VW dealer with that information and they can supply you with the necessary code.
remove the radio of the car than it will be a # on the radio call your locar vw service dealer to ask for the code.
Hi the answer is yes the radio is coded, you should find the code in your VW handbook . Regards Norman
Email me the code your radio displays and I will return you with the unlock code -- support@totaldream.org
Every radio has it's own code. You need to go to a VW dealer and they will get the code for you by removing the radio. It shouldn't cost anything to do this unless there is a problem and they need a mechanic to help.
whats number do i put in to unlock radio is it security code or radio code to unlock radio?
A Volkswagen Passat radio code can be found at any authorized VW dealership or service manual. If the code is incorrect the radio will not turn on.
Take your car to the vw dealership and they will give will put the code into your radio, however they will most likely charge you $100 dollars for getting the code for you and putting it in the radio. I see about 3-4 cars a day come in for radio codes so once you get that code keep it in a safe place you might need it again. On my 1996 VW Jetta you must hold down the right seek or scan button until the display blanks out. Then you can enter the unlock code.
yes
Unfortunately the code can not be retrieved from a working radio. If you can not find the code you have to get the serial number of the radio and call the dealer for the code.
Many persons have tried leaving the car on for at least an hour, then turn on the radio and it will reset itself. If that doesnt work, it is best you find a VW dealership and give them you VW serial number and they will find a code for you radio that will be able to make it work.
Your local dealer has to pull the radio and hook it to a computer to find the code. It cannot be done with the radio in the vehicle.