0
To reattach the window regulator and cables on a 2002 Mini Cooper, first, ensure the window is in the fully down position. Align the regulator with the mounting points in the door and secure it with the appropriate bolts. Then, thread the window cables through the designated slots in the regulator and ensure they are properly tensioned. Finally, test the window operation before reassembling the door panel.
What else can I help you with?
How do you reattach cables in a 1998 dodge durango window?
You will need a new regulator assembly.
How do you fix 1999 Chevrolet window regulator?
need to know how cables connect on window regulator
How do you adjust the cables on power window regulator on a 2001 Chrysler TC?
The cables are not adjustable. The regulator is only serviced as an assembly.
How do you put up a power window that doesn't work?
Remove the door trim panel.Then clip the window regulator cables. Push window up and tape it in place until you can replace the regulator
How do you replace power window motor on drivers side of a 2002 ford escape?
Window motor and regulator are found inside of the door panel and may be bolted or riveted in. Should be bolted. Disconnect the window from regulator, take out reg. and motor, then disconnect regulator from motor, reconnect new motor to regulator, reattach those inside of the door, then reconnect the window to the regulator, put it together and see if it works.
What is wrong with 1998 dodge ram window that keeps coming off the track?
Bad window regulator. The cables are not pulling evenly and it tilts the window.
Wow do i get my power windows up on my 96 aurora?
If the regulator is broken, you'll have to clip the cables to get to the window glass attaching bolts.Here's how to do ithttp://www.ricksfreeautorepairadvice.com/repair-topics/window-power-repair/replace-a-power-window-regulator
How do you adjust an electric window on a 2001 GM vehicle when the window cable is now back on the nylon pulley but the motor does not seem to know when the window is in the up position?
unbolt the window from the regulator and push the window all the way up and tape window to door then run the motor all the way up til it stops then reattach widow to regulator.
How do you replace the window lift cables on the jaguar s type?
To replace the window lift cables on a Jaguar S-Type, first, remove the door panel by unscrewing and unclipping it carefully. Once the panel is off, disconnect the window motor and remove the regulator assembly, which houses the cables. Replace the old cables with new ones, ensuring they are properly threaded through the guide tracks, and then reassemble the regulator and door panel. Test the window operation before securing everything back in place.
Where can you find a window cables diagram on 1992 Mercury Grand Marquis?
It is called a window Regulator go on line and you will find a picture of it. I have replaced 3 on mine.
There are two cables hanging down in your door that go to the window and your window wont go up but the motor still works?
The regulator has failed and needs replaced.
How do you roll up the window on a 99 eldorado if the drive motor is broke?
Use a side cutters and cut the cables. Tape the window up until you can replace the regulator.
