To remove the bonnet (hood) of a Mercedes-Benz 190E, first, ensure the vehicle is parked on a flat surface and the engine is cool. Open the bonnet and locate the hinges at the back; typically, you’ll need to remove the bolts securing the hinges using a socket or wrench. Once the bolts are removed, have someone assist you by holding the bonnet while you carefully lift it off the hinges. Finally, set the bonnet aside in a safe location.
Open the bonnet, remove the scuttle cover, wiper motor, and finally blower motor.
How do you remove a radio from a 190E?
1 Open the bonnet 2 On the bottom of the emblem there is a small pin, use a pair of pliers to remove it. This will cause the old emblem to spring out. 3 Put the new unit in from the top of the bonnet. 4 On the underside twist the new unit into the locked position. Thats it.
how remove cylinder head
first you have to open the bonnet from the driver's left side and when you put your hand under the bonnet there is a metal thing and you have to push it up than put the holder
On my 1984 190E, it is simple - there are a couple of tabs at the bottom of the back seat (where your heels would be if you were sittng), you have to look, the seat will pull right out!
undo the bolts and it will come off
Remove the hoses and clips , replace the hoses and clips!
There is no Inside Fuse box, the fuse box is located under the bonnet/hood. Looking at the car from the front , the fuse box is located on the extreme right toward the windscreen.
To remove the spark plug wire in 190e one needs a long nosed plier. Next go for the metal part just above the plugs and grip them tightly and pull up. To fix it all you need to do is to push it with your fingers. Done
My Ford Connect bonnet is opened by the main ignition key. There is a sliding plastic cover at the front center below the grill. Insert key and turn to the right, bonnet will click to safe open. Turn key again and at the same time lift bonnet. Remember to remove the key.
start by popping the bonnet