To remove a broken spark plug from a 1993 Volvo 850, first, ensure the engine is cool and disconnect the battery. Use a spark plug extraction tool or a left-handed drill bit to carefully drill into the center of the broken plug. Once you have created a hole, you can use an easy-out tool to grip and twist out the broken piece. If the plug is severely damaged, you may need to use a tap to clean the threads before installing a new spark plug.
I do not understand why you want to remove the porcelain if it is broken off. Just remove & replace the spark plug which is no longer any good if the porcelain is broken.
a broken spark plug der
The recommended spark plug gap for a 1987 Volvo (all models) is .028"
To remove a broken spark plug from a Ford F-150 Triton motor, first ensure the engine is cool and disconnect the battery. Use a spark plug extractor tool or a left-handed drill bit to carefully drill into the broken plug's center, then use an easy-out tool to extract it. If the broken piece is deeply lodged, you may need to remove the cylinder head for more access. Always ensure that any debris is cleaned out of the cylinder before replacing the spark plug.
You use an eas-out.
To remove a broken spark plug from a 2005 Ram 5.7 Hemi, first, ensure the engine is cool and disconnect the battery. Use a magnet or a spark plug extractor to retrieve any remaining pieces of the plug. If the plug is stuck, carefully use a left-handed drill bit to drill into the center, which may help it break loose. Alternatively, you can use a spark plug removal tool designed for broken plugs to grip and extract the remaining plug body.
spark plug gap is .028
If you mean that the wire came out of the boot, then pull the boot off of the spark plug and use a spark plug socket to remove the spark plug.
no it can not start with a broken spark plug wire unless you fix it
There are no spark plug wires. Each spark plug has its own coil and the spark plug attaches to the coil directly. To access the coil and plug, you need to remove the black plate on the top center of the engine (4-6 torx screws, I believe).
Remove the spark plug wire. Using a 5/8" spark plug socket with appropriate extension and driver unscrew the spark plug and remove it. The spark plug gap should be set to .045". Replace spark plug and reattach wire.
0.30