relay is located under the steering wheel above the fuses,if you have a torch it has flasher unit writen on it, it is very difficult to remove, i had to undo and remove the bonnet catch to get to it good luck
How i remove eveporator unit from toyota corolla 2002
To remove the front indicator on a Rover 75, start by opening the hood and locating the indicator assembly. You may need to remove the headlight unit by unscrewing the retaining bolts and gently pulling it out. Once the headlight is free, you can access the indicator bulb holder; twist it counterclockwise to release and remove the indicator light. Finally, replace or reinstall the indicator as needed.
The oil sending unit on a 2002 wrx subaru is almost under the alternator. I suggest you remove the alternator and it is easier to remove the oil sending unit.
On a Renault Clio from the 52 plate year (2002), the indicator flasher unit is typically located behind the dashboard, near the steering column. You may need to remove the lower steering column cover to access it. The flasher unit is usually a small, cylindrical relay that can be identified by its electrical connections. If you're having trouble locating it, consulting the vehicle's manual can provide specific guidance.
first remove indicator lens ,screw on inside of wing.Then remove screw at side of removed lens both upper bolts and then remove nut from underneath headlight.
Locate unit. (Under intake manifold.) Disconnect. Remove. Clean out unit with "Carb cleaner" or related. Reinstall. ;).
To remove the heater matrix from a 2002 Citroën Berlingo, first ensure the vehicle is cool and disconnect the battery. Remove the dashboard and the center console to access the heater unit. Disconnect the coolant hoses from the heater matrix, then unbolt and remove the heater unit from the vehicle. Finally, carefully extract the heater matrix from the unit and replace it as needed.
Front indicator bulbs - remove the complete headlight unit - see 'related answers' for this. Rear indicator bulbs - unfasten the rear light unit which is held in by a big plastic wing-nut on the inside. Lift the hatch and reach in behind the light unit. You will feel a hole in the trim and inside it a plastic wing-nut. Unscrew that and the rear light unit will come loose but will still be retained by two plastic pegs, top and bottom, on the outside. Get a firm grip of the light unit with both hands and give a sharp tug to release the plastic pegs. The light unit will now hang on its wiring. Bulb holders are twist-and-turn.
The indicator flasher unit in your 1996 automobile is located beneath the dashboard. The unit simply plugs in and out.
The indicator bulb on the VW Beetle wing mirror is an LED which means the unit must be replaced. You need to remove the mirror glass to access the LED.
To change the rear indicator bulb on a Ford Fiesta, first, open the rear hatch and locate the light assembly. Remove the relevant access panel or screws to detach the light unit from the vehicle. Twist the bulb holder counterclockwise to remove it, replace the old bulb with a new one, and reassemble the light unit by reversing the steps. Finally, test the indicator to ensure it’s functioning properly.