remove door panel then remove screws behind mirror. remove door panel then remove screws behind mirror.
To remove and install a door mirror on a 2000 Mitsubishi Mirage, the door panel needs to be removed on the inside of the door. First remove any light lenses in the door, then unfasten the clips holding the door panel on. Then remove the mounting bolt for the mirror. Put in a new mirror, replace the door panel and the light lenses.
On most vehicles, there will be nuts or bolts inside the door the mirror is located on, but under the door panel. If there is a triangular panel separate from the door panel, they may be under this. Otherwise, you will have to remove the door panel to access them.
To replace the driver's side mirror on the 2003 GMC Envoy, first remove the interior door panel. Then, remove the mirror connection cover inside the panel as well. Unscrew the screws holding the mirror to the door. Remove the wiring and replace the mirror with a new mirror. Replace the screws and place the door panel back onto the door.
remove door panel. disconect electrical connections and unbolt the mirror using a 10mm socket
You will need to remove the inside door panel of your 2002 VW Jetta. Remove the wiring harness from the mirror. Remove the side view mirror retaining bolts. Reverse the process to install the new side view mirror.
If you need to remove side view mirror: you need to remove door panel and there should be 3 nuts securing mirror to door.
To remove the interior door panel you first want to unscrew and remove the interior door handle, hand hold, and mirror adjustment cover. Then you also need to remove the power door lock switch which you can pop out with a flat blade screwdriver. Once everything has been removed, you want to carefully pop the plastic inserts. The interior panel is pretty much completely held on by those little plastic "push pins." To remove the exterior door panel you must first remove the exterior door handle. To do this you have to remove these little plastic pins on the underside. Once they are removed, you lift up on the handle and slide it left or right to remove. Once this is done you must also loosen the mirror by taking off the inside cover and there should be three nuts that need to be loosened. Then you must locate and remove all of the torx-head screws that attach the door panel to the door.
Remove the panel on top of the door panel it's a little access panel that clips on. After doing so their are 3 ten milimeter bolts hoding the mirror to the door. If it's a manual mirror on the drivers side then there will be one screw holding the lever in the panel and u have to remove that screw to remove the mirror.
To replace the exterior mirror on a 1996 Beretta, find a small plate on the inside of your door. Remove the screws and install the new mirror.
how to remove the door panel of a 1995 s10
Remove the inside door panel. Remove the wiring harness from the mirror. Remove the mirror retaining bolts. Reverse the process to install the new mirror.