answersLogoWhite

0

all you will need is to find rotor size because front and rear rotors are different and check wheel size Volvo"s have rotors sizes for different wheels packages disconnect battery find level ground jack up car remove wheel check brake remove caliper bolts remove rotor pin on rotor take a hammer knock old rotor loose check em,brake clean area from old brake dust reverse process

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

How do you replace park brake pads on a Volvo V70 2002?

To replace the parking brake pads on a 2002 Volvo V70, start by lifting the rear of the vehicle and removing the wheel. Then, remove the brake caliper and rotor to access the parking brake assembly. Take out the old pads, ensuring to clean the area, and install the new pads, making sure they are properly aligned. Reassemble the rotor and caliper, and repeat for the other side before lowering the vehicle and testing the brake function.


Replacing front brake pads on the Volvo s80 2002?

To replace the front brake pads on a 2002 Volvo S80, first, lift the vehicle and remove the front wheels. Next, detach the caliper by removing the caliper bolts, then carefully slide the caliper off the rotor. Remove the old brake pads and install the new ones, ensuring they are properly aligned. Finally, reattach the caliper, replace the wheels, and lower the vehicle, making sure to pump the brake pedal to seat the new pads before driving.


How do you remove rear brake rotors on 2002 diesel excursion?

To remove the rear brake rotors on a 2002 Diesel Excursion, first, ensure the vehicle is securely lifted and supported on jack stands. Remove the rear wheel and tire, then locate the caliper; unbolt it and slide it off the rotor. Next, remove the caliper bracket by unscrewing its bolts, then you can pull the rotor off the hub. If the rotor is stuck, gently tap it with a rubber mallet to dislodge it.


How do you remove serpentine belt on 2002 Volvo s60?

how to remove auxiliary belt from 2002 s60 Volvo


How do you install rotors on 2002 Dodge Grand Caravan?

Remove brake caliper and then caliper mounting frame . Rotor is now free.


How do you remove rotor on a 2002 Ford Escape?

Remove caliper,rotor comes right out


How do you remove the front brake rotors on a 2002 Chrysler sebring coupe?

Should be the "peel off" type Remove wheel Remove caliper mounting bolts Slide caliper off rotor Rotor should slide off hub assembly


How do you remove front rotors on 2002 infiniti qx4?

To remove the front rotors on a 2002 Infiniti QX4, first, lift the vehicle and remove the front wheels. Next, take off the brake caliper by unbolting it and securing it to prevent strain on the brake line. Remove the caliper bracket if necessary, then detach the rotor by removing any retaining screws and gently tapping it if it’s stuck. Finally, slide the rotor off the hub.


It feels like the emergency brake is on when i try to remove the rotor from the rear of a 2002 mountaineer.?

try tapping the rotor with a hammer to break the rust holding it to the hub. also need to remove the flat retaining nut which will be found on one of the lug bolts. If it still does not release you need to release the e-brake cable, the pads may have worn into the inner brake lining


Front right rotor is grinding on disc brake mount on 2002 ford escape?

Replace rotor / cut rotor & replace brakes.


What is the Minimum brake rotor thickness on 2002 Mitsubishi eclipse?

The minimum brake rotor thickness for a 2002 Mitsubishi Eclipse is 1.17 inches. When it falls below this thickness, braking performance will suffer and must be replaced.


What is the minimum front and rear brake rotor thickness for a 2002 Ford F-350?

The minimum thickness is cast into the rotor, either on the edge of the rotor or into the rotor hub.