To replace the alternator belt on a Peugeot 306, first, ensure the engine is off and cool. Start by loosening the tensioner pulley using a socket wrench to relieve tension on the belt. Remove the old belt from the pulleys and install the new belt, ensuring it follows the correct routing. Finally, re-tighten the tensioner pulley to secure the new belt in place and check its tension before starting the engine.
IN the Haines manual for that car.
To remove the alternator from a Peugeot 306, first disconnect the negative battery terminal to prevent electrical shorts. Then, remove the drive belt by loosening the tensioner and sliding the belt off the alternator pulley. Next, unbolt the alternator from its mounting bracket and carefully disconnect the electrical connections. Finally, lift the alternator out of the engine bay.
To tighten the alternator belt on a Peugeot 306 XSI petrol, first, locate the alternator and identify the tensioning mechanism, which typically consists of a tensioner pulley or an adjustment bracket. Loosen the bolts securing the alternator, then adjust the position of the alternator to increase belt tension. Once the desired tension is achieved, re-tighten the bolts securely. Finally, check the belt's tension by pressing down on it; it should not deflect more than half an inch under moderate pressure.
Your local auto parts store would be able to get you an alternator belt diagram for a Peugeot 306 Rally 2-liter, 16-valve model without air conditioning. You can also find it at the library.
yes there is.
70,000 miles
fanbelt on a 306 hdi how do fit it
To change the alternator on a Peugeot 306, begin by disconnecting the battery to ensure safety. Remove any components obstructing access to the alternator, such as the air intake or engine covers. Loosen the serpentine belt tensioner to remove the belt from the alternator, then unbolt the alternator from its bracket and disconnect the electrical connectors. Install the new alternator by reversing the process, ensuring everything is securely reattached before reconnecting the battery.
The belt may be cut off, or the pulleys may be held in place by bolts as the camshaft is turned to align the holes so as not to lose the timing. Then replace the belt by loosening the tension pulley.
Every 75k
best place to go to would be www.partsgateway.co.uk or there is a place i sued for my alternator in witham called Essex Motors on 01376 651648
To change the fan belt on a Peugeot 306 D Turbo, first, ensure the engine is off and cool. Remove any necessary components for access, such as engine covers. Loosen the tensioner pulley using a wrench, then slide the old belt off and replace it with the new one, following the correct routing. Finally, adjust the tensioner to tighten the new belt and reassemble any removed parts.