0
you have to pull out engine and trany and when out split the her apart to get to the bearing,its a big job......good luck
The top answer is incorrect if its a 2.0 this is a very easy job ill you need is a hammer a flat head screw driver on the far left of your trans is a big green cap with the VW on it knock it of with the tools above a little fluid will leak so get a cup next undo your clutch cable and look for a little black vw plastic clip on your release arm pry it of and let the arm fall the now back to the cap area the little black disk is your throwout baring a magnet will help pull it out .
What else can I help you with?
Why is the transaxle noisy when you release the clutch in 1994 VW Golf?
It will be due to the input shaft bearing in gearbox.
What is different about installing the throw-out bearing on a 1994 Ford F-250 4x4 compared to earlier models?
On a 1994 F-series you need a special tool to release the spring on the plastic hydraulic line at the throw out bearing down by the trans. And the old style the clutches are usually mechanically operated and the throw out bearing functions from what is called a clutch fork or clutch arm.
How do you change the throw out bearing on a 1994 Mazda?
To change the throw-out bearing on a 1994 Mazda, first, lift the vehicle and remove the transmission by disconnecting the driveshaft, clutch linkage, and any electrical connections. Once the transmission is out, remove the old throw-out bearing from the clutch fork and replace it with a new one, ensuring it is properly seated. Reassemble by reversing the steps, making sure to reattach all components securely. Finally, check the clutch operation before driving.
How do you replace the fan clutch on a 1994 Nissan Pickup V6?
the fan clutch is built into the water pump,it cant be separated,you have to replace the water pump.
1994 integra GSR transmission makes noice when clutch is not depressed just replaced clutch a few weeks ago?
Maybe "throw-out" bearing Should have been replaced w/clutch
How do you replace a wheel bearing on a 1994 Buick LeSabre?
AnswerFront or rear?front
I need a diagram to replace the clutch in a 1994 Mazda b3000?
A diagram to replace the clutch in a 1994 Mazda B3000 is available in how-to books at most major auto parts stores. These types of manuals are also available at major book stores.
How can you tell if the water pump on a 1994 Saturn is bad or if it is just the bearing?
if the bearing is noisy or the pump is leaking replace the pump.It is a job to replace but if you wanat to get a manual on your car from DISCOUNTAUTOREPAIRMANUALS.COM
How to replace a wheel bearing in a 1994 Mitsubishi Eclipses?
Just get a new hub from a junkyard.
How do you replace a clutch kit in a ford escort 1.9l 1994?
you will need to remove either the engine or the transmission(engine is easiest in the 94 escorts) replace the clutch and put the engine back in
How do you fix a 1994 Nissan Sentra manual transmission that you can shift into all gears but 4th?
replace your pressure plate (diaphragm type), and the clutch. replace your pressure plate (diaphragm type), and the clutch.
Why would your 1994 ranger make a grinding and clanking sound and not move when you let out the clutch no matter which gear it's in even neutral?
needs new clutch pressure plate and throw out bearing
