0
Pop the hood..on the passenger side along the oil dip stick is a 3 prong plug disconnect it<Cut the wheel all the way to the right<look inside the wheelwell<By the crank pulley is a small senor held in place by a 10 mm bolt<Remove the bolt< Turn the senor away From the dipstick tube and pull the wire thru it< Biggest problem is whats next <Getting the sensor thru the bracket its ran thru< You will either have to loosen up the accesories and bracket or cut the plug off and re-feed it thru and then tape up the three wires inside<thecarguy84@live.com
What else can I help you with?
Where is speed sensor on mx6?
in the transmission
How do you replace the ignition distributor on a 93 mx6 v6?
How do you replace the ignition distributor on a 93 mx6 v6 pics?
Where is the iat sensor located in a 93 mx6?
it is located in side the maf actually they use the same sensor housing.
Your speedometer wont read on your Mazda mx6 what sensor do you need?
VSS ( Vehical Speed Sensor ) located on your transmission
How do you replace fuel injectors 1990 Mazda mx6?
Take out the old ones and replace them with new ones.
Where is the crank sensor Mazda mx6 2.5?
its under crank shaft hub. hope its helps.
How do you remove the speed sensor on a 1993 Mazda mx6?
To remove the speed sensor on a 1993 Mazda MX-6, first, locate the sensor, which is usually found on the transmission. Disconnect the electrical connector and then remove the retaining bolt or nut securing the sensor in place. Gently pull the sensor out of the transmission, taking care not to damage any surrounding components. If necessary, replace the O-ring before installing the new sensor.
Why does the 4wheel abs light on mx6 dashboard come on?
If the abs light on a 4 wheel MX6 dashboard comes on, it is due to faulty abs sensor. It may also be due to a faulty rotor.
How do you change the speed sensor in a 1993 Mazda MX6 V6 ENGINE?
To change the speed sensor in a 1993 Mazda MX6 V6, first, disconnect the negative battery cable to ensure safety. Locate the speed sensor on the transmission; it is typically on the driver's side. Remove the electrical connector and any retaining bolts, then pull out the old sensor. Install the new sensor by reversing the removal steps, ensuring it's securely fitted and reconnect the battery.
How to replace Mazda mx6 timing belt?
To replace the timing belt on a Mazda MX-6, first ensure the engine is cool and disconnect the battery. Remove the necessary components like the serpentine belt, crankshaft pulley, and timing cover to access the timing belt. Align the timing marks on the crankshaft and camshaft, then remove the old belt and install the new one, ensuring it is properly tensioned. Finally, reassemble all components, double-check the alignment, and reconnect the battery.
What is the cost to replace a CV Joint in a 1994 Mazda MX6?
afew bucks pretty cheap price it out and it will surprise you...
Witch parts do you replace in manual transmission when it brakes in a 93 4 cil Mazda mx6?
How long is a piece of string ????
