0
To reprogram a key for a 2003 Oldsmobile Alero, you'll need to have at least one functioning key. Insert the working key into the ignition and turn it to the "On" position without starting the engine, then turn it back to "Off." Repeat this process for a total of five times, ending with the key in the "On" position. After the fifth time, the security light will flash, indicating that the car is in programming mode; insert the new key and turn it to the "On" position for about 10 minutes to complete the programming.
What else can I help you with?
Does a 2003 olds alero have a chip in the key?
according to my gm dealer it does not. The passlock system is in the ignition cylinder
How reprogram 2003 VW key?
you will need to go to a main dealer to get it reprogram it
How do you get a 1999 Olds Alero to start after replacing the ignition switch and key and bypass security code?
I don't think you can bypass them.
What if keyless entry isn't working on a 2003 Hyundai Tiburon?
use your key and reprogram your remote from the dealership
Could you add remote keys and reprogram on Alero 2003 with power locks but without remote keys?
Yes, you can add and reprogram remote keys for a 2003 Alero with power locks, even if you don't have the original remote keys. You will need access to the vehicle's onboard diagnostics (OBD) system and a compatible key programming tool or software. Follow the specific programming procedure outlined in the vehicle's service manual, which typically involves a series of steps to enter programming mode and synchronize the new remote with the car's system. If you're unsure, it's best to consult a professional locksmith or dealership for assistance.
Does the radio shut off with the key in a 2003 alero?
it shuts off when you open the driver side door....
How do you bypass or reset security system to start 1999 alero olds after replacing ignition switch and key?
You can't bypass or reset security system, bring it to the dealer.
Can you reprogram Mercedes key fob?
No
Can you put a new battery in the key fob for a 2005 vw touareg and then reprogram the key yourself?
You normally do not have to reprogram the key when you replace the battery. If you do you will have to contact your VW dealer.
How do you reprogramme a Honda ignition key?
To reprogram a Honda ignition key you need to use a Honda-approved dealer. Only a dealer can reprogram or order a new ignition key for a Honda vehicle.
How do you reprogram the transponder on a 2003 mercury sable?
To reprogram the transponder on a 2003 Mercury Sable, you'll need a working key and the vehicle's ignition system. Start by inserting the working key into the ignition and turning it to the "On" position without starting the engine. After about 10 minutes, turn the key back to the "Off" position and repeat this process two more times. On the third cycle, turn the key to the "On" position and then quickly insert the new key within 10 seconds to program it.
How do i reprogram a key fob for a 1996 crown Victoria?
what answer!
