first you have to find out why its on.advance auto parts or autozone have the computer to tell you why its on and that will reset it or disconect the battery for a few mins and that will do it also.
Battery disconnect or a scan tool.
You may need to replace the power control module.
disconnect battery for 30 seconds
If you fix the reason the light came on in the first place the check engine light will reset itself after a few drive cycles.
Charging system failure:::,check alt.voltage regulator is inside engine controller
That is the check engine light, see related question below.
see link below, should look like the picture there.
That sounds like problem in the cluster. The high beam indicator is cross wired to the check engine light when it shouldn't be.
CAR WONT START Transmission may not shift. Check engine light could be on.
try replacing the thermostat
To reset the check engine light on a 2000 Dodge Intrepid, you can disconnect the negative battery terminal for about 15 minutes. This will erase the trouble codes and turn off the light. Alternatively, you can use an OBD-II scanner to clear the codes directly. However, if the underlying issue causing the light to turn on is not resolved, the light will likely reappear.
There is no individual fuse. The ECM has 2 or 3 fuses, and it controls the check engine light.There is no individual fuse. The ECM has 2 or 3 fuses, and it controls the check engine light.