To reset the brake light on a 2007 Mini after changing the brake pads, turn the ignition key to the "on" position without starting the engine. Press the accelerator pedal three times within 10 seconds. This should reset the brake light indicator. If it doesn't turn off, you may need to use a diagnostic tool to clear any remaining codes.
the only way you change brake pad or disc
Go to the ford dealer ship.
To reset the disc brake light on a Mitsubishi FE180, first ensure that the brake system is functioning correctly by checking the brake fluid level and inspecting the brakes. If everything is in order, turn the ignition key to the "ON" position without starting the engine. Press the brake pedal three times within five seconds; this should reset the brake warning light. If the light remains on, consult the vehicle's manual for specific procedures or seek professional assistance.
To reset the disc brake warning light on a 2004 BMW 325i, you typically need to use a diagnostic tool or follow a manual reset procedure. If you have a diagnostic scanner, connect it to the OBD-II port and clear the fault codes. Alternatively, you can turn the ignition to the "on" position without starting the engine, then press the brake pedal three times. If the light persists, ensure that the brake pads are properly installed and that the brake fluid level is adequate.
it indicates that it is time to change the pads for the disc brakes, the light comes on when the sensor is activated
press reset
disc key for rickey ponting international cricket 2007
You can not change a disc to play on a different console. Discs are not even able to be rewritten
insert boot disc if you don't own one try eBay
A disc can easily be cleaned with a soft cloth and light water. If this does not help, the disc may need to be resurfaced.
What is a rear disc patch?
Yes there are many portable mini disc player products that light up.