To reset the service indicator in a 2007 Audi A6, turn on the ignition without starting the engine. Press the gas pedal fully three times within 10 seconds. Then, turn off the ignition and start the engine to verify that the service light has been reset. If the light remains on, repeat the process.
Indicator lights on an Audi can be reset by a mechanic. The cars manual will also give instructions on how to reset this light as well.
The service indicator on an Audi A6 can only be reset with something called the VAGCOM. One may be found on line but it would be better to take in into an Audi dealership or authorized mechanic because more damage can be caused.
To reset the service indicator on a 2001 Audi A3, turn the ignition on without starting the engine. Press the gas pedal fully three times within five seconds. After doing this, turn off the ignition and then start the engine to ensure the service indicator has been reset. If the light remains on, repeat the process.
To reset the service indicator on an Audi A3, first, turn on the ignition without starting the engine. Then, press the accelerator pedal fully three times within ten seconds. After that, turn off the ignition and start the engine again to verify that the service indicator has been reset. If necessary, consult your owner's manual for specific instructions related to your model year.
A combination of pulling and pushing the 2 speedo buttons at the same time. This should reset the service light.
Hold in the wrench button on instrument cluster, and at the same time turn your key forward (without starting). While still holding the "wrench" button in, press the "0,0" button and hold until the "SERVICE!" notification clears (about 2-3 seconds). "Service!" Indicator Reset Procedure/Service Indicator Reset Complete!
I Think its a main dealer job only as they use a guided function with the Audi VAS computer to reset the service display
with a dignostic tool
You will need to take the 2006 Audi A6 to a mechanic to have the service light properly reset. In some cases, a person can undo the battery to reset the light.
Click the link.
To reset the service interval on your Audi TT TDI, turn on the ignition without starting the engine. Press the accelerator pedal fully down three times within 10 seconds. Then, turn off the ignition and start the engine to confirm that the service light has been reset. If it doesn’t reset, repeat the process.
You need VAGCOM software to do so.