0
Key on (position 2, all idiot lights come on, engine NOT running)
PUSH the trip odometer reset knob twice rapidly, the time/distance remaining for FSS is shown.
PUSH button in and hold it in.
Turn key OFF (DON"T release the button!)
Turn key back to position 2....KEEP holding the button down!
You'll need to hold it down over 10 seconds, you'll hear the beep and 10000 will be the new display. DON'T release the button until you hear the beep.
The (O) button is the one
Make sure the doors are closed
What else can I help you with?
How do you reset the service indicator on a Mercedes ml 270 cdi 2002?
Itshould be listed in your owners manual under maintainence
How do you reset service indicator message for 2002 Mercedes Benz C240 after service?
On the dashboard browse through the menu until you see the "You have exceeded the service by ... days" then click and hold the reset button for about 2 seconds (its the thingy that you rotate on the side of the dashboard) It will ask you to confirm, click on it again.
Reset the service interval indicator on VW Bora 02?
To reset the service interval indicator on a 2002 VW Bora, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within 10 seconds. After doing this, turn the ignition off and then back on to confirm that the service indicator has been reset. If the indicator still shows, repeat the process to ensure it has been properly reset.
How do you reset the service reminder indicator light on a 2002 Corolla?
Go to auto zone and have the codes read for free.
How do you reset the service light on a Mercedes A140 2002?
Read the drivers hand book or car manual. It is easy to do.
How do you reset service light on a 2002 Mercedes clk 320?
To reset the service light on a 2002 Mercedes CLK 320, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After this, turn the ignition off and then back on to verify that the service light has been reset. If it remains lit, repeat the process.
How do you reset the Performing Service indicator light on a 2002 Grand Cherokee Laredo?
AnswerThe answer can be found in your owner's manual.Key on, engine off.Press "step" until "0 miles to service" is displayed. Press and hold "reset".
Oil light spanner light on a 2002 ford transit?
Service indicator reset switch ignition to position 2 press brake & accelerator pedals together for 15 seconds service indicator will flash when reset release pedals turn ignition off hope this was useful Mike 2
How do you reset the service spanner on a fiat ducato 2002 2.8cc?
To reset the service spanner on a 2002 Fiat Ducato 2.8cc, turn on the ignition without starting the engine. Press the gas pedal three times within ten seconds, then turn off the ignition. When you restart the engine, the service indicator should be reset. If it remains lit, repeat the process.
How do you reset the Performing Service light indicator after a maintenance on a 2002 Grand Cherokee?
With the engine turned on and someone in the driver seat. Hit the step button until 0 miles to service appear, hit RESET. A beep will sound and it is done.
How do you turn the service light off in an 2002 Audi a4 1.9 Tdi?
Hold in the wrench button on instrument cluster, and at the same time turn your key forward (without starting). While still holding the "wrench" button in, press the "0,0" button and hold until the "SERVICE!" notification clears (about 2-3 seconds). "Service!" Indicator Reset Procedure/Service Indicator Reset Complete!
How do you reset service 4 wheel drive indicator on a 2002 Chevy trailblazer?
To reset the service 4-wheel drive indicator on a 2002 Chevy Trailblazer, first, turn the ignition key to the "On" position without starting the engine. Then, press and hold the "4WD" button for about five seconds until the indicator light blinks and then turns off. If the light persists, it may indicate a deeper issue, and you should consider consulting the vehicle's manual or a professional mechanic for further diagnosis.
