That is an open question. What part of the OBD system are you looking at?
To reset the SRS airbag light on a Volvo S60, you typically need to use an OBD-II scanner that can read and clear airbag codes. First, connect the scanner to the vehicle's OBD-II port, usually located under the dashboard. After retrieving any fault codes and addressing any underlying issues, you can clear the codes to reset the airbag light. If you don't have access to a scanner, it's best to consult a professional mechanic or a Volvo dealership for assistance.
You need an OBD scanner or take it to your local Auto Parts store. Stores like Advance auto parts can usually read codes for you. The generic codes they read out can be converted to Volvo's OBD codes. The generic codes usually start with the letter P.
A person can reset the check engine light by using an OBD scanner to clear the codes. This is after the problem is fixed.
it means you can appear the obd code problem, and the obd2 scanner can help you solve this problem.
You need an OBD II Reader (On Board Diagnostics) to plug into the socket located inside the console between the driver and passenger seats. If you do not want to buy and OBD II Reader then go to an auto parts store and ask them to read the error codes and reset the Check Engine Light..
You can reset it with your OBD reader or you can disconnect the negative battery cable for a couple of minutes to reset the check engine light.
To reset the emission fault light in a 2008 Volvo V70, you can use an OBD-II scanner to clear the diagnostic trouble codes (DTCs) that triggered the light. Simply plug the scanner into the OBD-II port, read the codes, and follow the prompts to erase them. Alternatively, you can disconnect the battery for a few minutes, which may also reset the light. However, it's essential to address any underlying issues that caused the light to come on to prevent it from returning.
To reset the check engine light on a 2005 Volvo S40, you can use an OBD-II scanner to read and clear the trouble codes. Alternatively, you can disconnect the car battery for about 10-15 minutes, which will reset the system. After reconnecting the battery, the check engine light should turn off if the underlying issue has been resolved. However, it's important to address any underlying problems that triggered the light before resetting it.
To reset the check engine light on a 1993 Volvo, you can disconnect the battery for about 15 minutes, which will clear the error codes and reset the light. Alternatively, you can use an OBD-I scanner to read and clear the codes directly from the vehicle's diagnostic system. Make sure to address any underlying issues that triggered the check engine light before resetting it to avoid future problems. Always consult your vehicle's manual for specific instructions.
To reset the check engine light on a 1993 Volvo 960, you can disconnect the negative battery terminal for about 10-15 minutes, then reconnect it. This will clear the diagnostic trouble codes stored in the system. Alternatively, you can use an OBD-I scanner to read and clear the codes if available. Make sure to address any underlying issues before resetting the light to ensure it doesn't come back on.
Trouble code P0751 means: Shift solenoid A,performance problem or stuck in Off position