0
Do this at your own risk. Toward the front of the motor on the drivers side is a large black diagnostic plug with a cap on it. Undo the cap and pull it off. In the center is a hole shaped like pacman. The lid has a piece that sticks down into the pacman hole. If you don't see pacman you have the wrong plug. Surrounding pacman is two rings of holes, some with connectors in them and some without. Using a fused jumper connect the hole two spaces away (outer ring) and directly in front pacman's mouth with the hole closest to (inner ring) and directly below pacman viewing pacman's mouth to your right. Turn the key to the on position, in about 5 seconds the oil service lights should go out. Immediately turn the key to the off position and remove the jumper. Then test it by starting the motor, if the light is still on repeat the above steps.
What else can I help you with?
How do you reset the oil service light manually on a 1992 BMW 320i?
you can ground out one of the pens in the diagnostic port.[different ports for different models]
How do you reset service engine soon light on 1992 Regency?
A 1992 Regency has an OBD I system. The easiest way to reset a service engine soon light is to disconnect the battery and leave it disconnected for a minute or two. You will lose all of your radio presets though. CAUTION: Make sure that the problem is fixed before you reset the light because it will probably come back on.
How do you reset service engine soon on a Chevrolet astro 1992?
To reset the "Service Engine Soon" light on a 1992 Chevrolet Astro, you can disconnect the battery for about 15 minutes. This will clear the engine codes and reset the light. Alternatively, you can use an OBD-I scanner (if available) to clear the codes. After resetting, ensure that any underlying issues are addressed to prevent the light from coming back on.
How do you reset service engine soon light on a 1992 Saturn sc?
remove the battery cable for 1 min
How do you reset computer on a 1992 Oldsmobile Cutlass Supreme?
To reset the computer on a 1992 Oldsmobile Cutlass Supreme, unhook the battery for about five minutes. Then reconnect the battery. If this does not work, look for the reset button on the computer and manually reset it.
How do you reset service engine soon light on 1992 Regency Oldsmobile?
To reset the "Service Engine Soon" light on a 1992 Regency Oldsmobile, you can first disconnect the negative battery terminal for about 10 to 15 minutes. This will clear the engine codes and reset the light. Alternatively, if you have access to an OBD-I scanner, you can use it to read and clear the trouble codes, which will also turn off the light. After resetting, ensure that any underlying issues are addressed to prevent the light from coming back on.
How do you reset the oil change light on a 1992 Corvette?
== == how do you reset the oil light on a1992 corvette
Reset the service engine soon light on a 1992 Chevy G30?
To reset the "Service Engine Soon" light on a 1992 Chevy G30, first locate the fuse box and remove the fuse for the "Check Engine" light for about 10 seconds before reinserting it. Alternatively, you can disconnect the negative battery terminal for about 15 minutes to reset the system. After re-establishing the connection, start the engine and check if the light has turned off. If the light remains on, consider scanning for trouble codes, as there may be an underlying issue that needs addressing.
How do you reset maint reqd light on 1992 Plymouth voyager?
The maintenance required light requires a scan tool to be reset.
How do you turn off check engine light code 19 on a 1992 Honda civic si?
Check engine codes on Honda vehicles such as a 1992 Honda Civic have to be manually reset. To do so, remove the ECU fuse located inside the engine bay.
Abs light reset 92 Chevy lumina?
The easiest way to reset the ABS light in a 1992 Chevy Lumina is to disconnect the battery for about 30 minutes. When it is reconnected, the light should be reset.
How do you reset the Service Engine Soon light on a 1992 Tempo GL?
YOU CAN USE A FORD CODE SCANNER TO RETRIEVE CODES. AFTER CODE ITEMS ARE REPAIRED, FOLLOW INSTRUCTIONS IN CODE SCANNER BOOK TO RESET COMPUTER IN CAR.
