You will need to insert the 5 digit code in order for the radio to work. If you do not have the code, the you have no choice but to get the serial # off the radio and go to a Honda dealer. With the serial # they can tell you the code. You must remove the radio in order to see the serial #. Look in the glove box, owners manual, etc for a small card with the code on it. Also look in the owners manual for a 5 digit code written down somewhere. Good luck.
Mine was reset when the radio says "code" by entering 2456 on radio channels
i have a 94 camry and i need the code to unlock the radio
i need to know how to set the radio when you battery goes dead and the radio says code its a 2001 mits monyero sports.
To set your radio follow this procedureTurn car onTurn radio on, then off.Turn radio back on, a message CODE will appear.Enter code using the preset buttonswhen finished entering code, press the > button and you will hear sweet sounds of music!**if your radio says CODE WAIT, you will have to wait for an hour or so for the car to reset the code. There is NO WAY around this if your radio says CODE WAIT**If you do not have the code for your radio,Find out what model you have:turn car onturn radio on, then offTurn radio back on and press and hold the M button for 10 secondsa code will display on the radio with your model number of the radio.Call your local BMW dealer and tell them you have the serial # for the radio and need the code, be nice. If they cant/ wont give you the code, look up another dealer and call them, continue to call until a nice dealer gives you the info DO NOT PAY FOR IT!Source(s):Have owned many cars including 6 BMWs and 2 Mercedes
AnsOn erugh- the cabrio radio reset. The code is in your sound system manual (part of the larger manual). if you bought your car used, its likely the owner removed the card w/ the code. I've had my code memorized for years. I think you can take your car to VW to get the whole system reconfigured for a new security code if you can't find it. Sorry- and good luck. If the display says "SAFE" reset the radio display as follows: On the radio panel hold the "seek" button down by pushing it on the right. Let go, enter the radio code using the radio station buttons. Hold the "seek" button down again by pushing it to the right. The radio will come back on.
radio says safe but cant put the code in
i have brought a car but the radio is showing safe mode and unfortunately i do not have a code are you able to supply the code radio is blaupunk 300 car is a vauxhall zafira 2002
My fuel gauge, odometer and radiator gauge isn't working and my radio says locked. How can I fix this?
There is a code to type in to re-activate your radio. The code is sometimes on the lid of the fusebox located in the engine compartment. You may also find it inside your manual.
I have Ford Ranger 2004 Model my battery was flat now my radio cant play it says it needs a code.
You need the 5-digit code for the radio. The system locks when power has been disabled or the radio removed from the vehicle. Call a MB dealership. I have the same problem with my '99 SLK230. I know the code too. The book says if power has been interupted and the code has been entered incorrectly more than 3 times, the system will lock itself out. However, the book also says that once the radio is on again it should reset itself in 10 minutes or so. I have let my car run with the radio turned on for more than 30 minutes and it didn't reset so I could enter the code. Now, does anyone know how to fix this?
To reset the Audi radio code when it displays "SAFE 2," you'll need to enter the correct security code. First, turn on the ignition but keep the radio off. Then, hold down the "TP" and "RDS" buttons simultaneously until "SAFE" appears. After that, use the radio preset buttons to enter the code, followed by pressing the "TP" button to confirm. If you don't have the code, you may need to consult your owner's manual or contact a dealer for assistance.