You can't. It is a dealer-only job, and even then I'm told that not all dealers can do it!
I've just spent all afternoon with my own OBD2 diagnostic plug trying to do it without success.
FSS can be reset, look in Owner's Manual.
To reset the service indicator on a 2005 Range Rover, first turn the ignition to the "on" position without starting the engine. Press the gas pedal three times within ten seconds, then turn the ignition off. When you restart the vehicle, the service indicator should be reset. If it doesn't reset, you may need to repeat the process or consult the owner's manual for further instructions.
To reset the maintenance service indicator on a 2005 Mercedes SLK 350, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. Then, turn off the ignition and start the engine; the maintenance light should be reset. If the light remains, repeat the process.
To manually reset the service indicator on a BMW X5 (2005 model), turn on the ignition without starting the engine. Press and hold the trip odometer reset button on the dashboard, then turn the ignition off and back on while still holding the button. Continue to hold the button until the service indicator resets and the bars disappear. Release the button, and the service indicator should now reflect the reset status.
To reset the service indicator on a 2005 Porsche Boxster, turn the ignition to the "On" position without starting the engine. Press and hold the gas pedal while simultaneously pressing the brake pedal for about 10 seconds until the service light blinks and then goes off. Release the pedals, and the service indicator should be reset. If the light remains on, you may need to consult the owner's manual or a professional for further assistance.
To reset the service light on a 2005 Astra, turn the ignition key to the "ON" position without starting the engine. Press and hold the trip odometer reset button on the dashboard until the service indicator resets, usually indicated by a flashing light or a beep. Release the button, turn off the ignition, and then start the engine to confirm that the service light has been successfully reset.
I feel like I keep repeating the same thing over and over so i will try again. How do you reset the oil change indicator on a 2005 BMW X3. Thanks Rod53
To reset the service indicator on a 2005 Mercedes-Benz SLK 350, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within 10 seconds. Then, turn off the ignition and start the engine; the service light should be reset. If it doesn't reset, you may need to repeat the process or consult the owner's manual for additional instructions.
Open your owner's manual. Key on, doors closed. Press "step" until "0 miles to service" is displayed. Press and hold "reset" until it resets.
If your 2005 Nissan Frontier has a full tank but the fuel indicator shows empty and the service engine light is on, you may need the computer or the "brain" reset or replaced. You can take the truck to a garage or to the Nissan dealer to have this done.
You would have to have service B performed by a authorized Mercedes Benz technician. There is a special laptop they hook up to the cars after these services are performed in order to get rid of that message on your dash. On the CLK 320 Cabrolet you have to perform a series of actions on your dash i.e. reset button etc. to reset the service reminder. There is no plug in for a Mercedes techniciam to reset the reminder.
My 2005 Chevy 4wd, ext. cab,shrt bed, has push buttons to go from(from top to bottom) Auto 4wheel drive, to 2 High , then to N(neutral), and then to 4 high, then to 4 low. At approx. 50,000 mi. the service indicator light came on and indicated "Service 4wd." I re-set the indicator, and forgot about it. Now, at 63,000 mi. it's telling me to service the 4wd, only this time the reset works until I turn the ignition off. when I restart, the service light comes on. However, the indicator lights that show which gear the transfer case is in, does not light up, and there is no automatic shifting of the transfer case. Is there a simple solution to this problem? Recommendations...Please! popo63