answersLogoWhite

0

I own a 1991 Mercedes and was well overdue for new brakes. Upon inspection, I had three cross threaded wheel bolts. If you have this problem on an older car with long seemingly impossible bolts like me, I have the answer. The head broke off of two of the bolts so any normal attempt through drilling of pounding or wrenching wouldn't work. Simply loosen all wheel bolts that you can and attach a chain with a hook to the rim of the car youre fixing and the other end of the chain to a truck or strong car and rip that sucker off. F.y.i. you'll need a replacement rim more than likely. Good luck, most shops charge a LOT.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

How do you reset a combination on a kwickset bolt lock?

Undo the bolt


A bolt that is threaded into a casting is called?

Cap screw


What is difference between Stud and stud bolt?

stud has all its length threaded and it is used with two nuts, but the bolt has one end closed and the other end is threaded ,it is used with a single nut.


Is the bolt on a Chevy truck idler pulley threaded backward?

NO it is not.


Can you undo a self locking screw and bolt?

Yes you can


How do you replace the belt tensioner on a vs v6 commodore?

To replace the belt tensioner on a v6 commodore you start by removing the fan belt by using a 18mm spanner and rotating the pulley assembly anti clockwise. Undo the bolt by holding the tensioner pulley on and use the 18mm spanner to turn bolt clockwise to undo threaded. Place new pulley onto shaft, drop some Loctite onto bolt and screw in. Rotate pulley anti clockwise and put the fan belt back in.


What is the name of the hole in a nut and bolt set?

It's a threaded hole.


Is the crank pulley bolt on a 1993 Honda Civic reverse threaded?

No it is not.


Is the flywheel bolt on a 1997 Mazda 626 standard or reverse threaded?

It's a standard thread not reverse threaded. Same with the automatics flex plate bolt and manual transmission's pressure plate bolts.


How do you change manual gearbox oil in a 1999 Hyundai Excel?

Undo the drain bolt on the bottom of the gear box, but undo the filler first so it flows easier. 24mm bolt i think.....


How do you change the transmission oil on 1984 Toyota truck?

there should be an upper and lower bolt on the underside of your transmission. undo the lower bolt to drain the fluid. undo the upper bolt and put some fluid in to drain the old. tighten the lower then fill to the hole. tighten the upper bolt


What is the bolt on the cuff called on anarchy skates?

It is called a threaded cuff pin.