To remove the speedometer (speedo) on a Renault Clio, you will first need to locate and access the instrument cluster behind the dashboard. You may need to remove the dashboard trim panels or covers to access the cluster. Once you have access, you can disconnect the wiring harness and mounting bolts securing the speedometer in place. Carefully remove the speedometer from the cluster and replace it with a new one if necessary.
Take dashboard out, then remove surround around the stearing and remove to to far screws
to change the speedo on a mk1 clio u a to take off top half of the dash there are screws by the window and screws when ypu open the door, then you have to take off the panels around the steering wheel, and the panel underneath that, then it is easy u will under stand frm there
To fit a speedo sensor to a 1998 Renault Clio, first ensure the vehicle is safely lifted and secured. Locate the speedo sensor, typically found on the transmission housing, and disconnect the wiring connector. Remove the old sensor by unscrewing it and install the new sensor in its place, ensuring it is securely fastened. Finally, reconnect the wiring and test the speedometer to ensure proper functionality.
Yes, you can fit a speedo cable and pedometer into a Renault Clio 2001 model. You will need to order the part that is made for that make and model from your local auto parts store.
If it's a Mk2 Clio then the speedo is electronic - Mk1 Clios had cable driven speedos.
To remove the speedometer from a Renault Clio, first, ensure the vehicle is off and the keys are removed. Carefully detach the dashboard cover by removing any screws or clips holding it in place. Once exposed, disconnect the wiring harness from the back of the speedometer and unscrew it from the dashboard. Finally, gently pull the speedometer out of its housing.
How to remove ecu from a renault clio 2003
How do you remove fuel filter from your renault clio w reg?
You can remove the speedo assembly and remove the bulb, problem solved. You can remove the speedo assembly and remove the bulb, problem solved.
To remove the speedo head from a 1989 Mazda 323, first disconnect the negative battery terminal for safety. Then, remove the dashboard panel to access the instrument cluster. Unscrew the screws holding the speedo head in place, disconnect the speedometer cable, and carefully pull the speedo head out of the cluster. Reassemble the dashboard once the speedo head is replaced or serviced.
it depend of what ECU have.
Pull the speedo and gauge package out of dash. Unhook wiring. Remove speedo cable from speedometer. Pull speedo cable out of housing, lube it lightly and re-insert. Hook everything back up and re-install gauges. Pull the speedo and gauge package out of dash. Unhook wiring. Remove speedo cable from speedometer. Pull speedo cable out of housing, lube it lightly and re-insert. Hook everything back up and re-install gauges. Pull the speedo and gauge package out of dash. Unhook wiring. Remove speedo cable from speedometer. Pull speedo cable out of housing, lube it lightly and re-insert. Hook everything back up and re-install gauges. Remove gauge package. Remove wires and speedo cable housing. Pull speedo cable out, lightly lube with grease and re-insert. Hook everything back up and re-install gauge packege.