To change the rear shocks on a Volvo C70 Turbo, first, safely lift and support the rear of the vehicle using jack stands. Remove the rear wheels for better access, then locate the shock absorber at the rear. Unbolt the top and bottom mounting points of the shock using the appropriate socket or wrench, and remove the old shock. Install the new shock by reversing the process, ensuring proper torque specifications are followed, and reattach the wheels before lowering the vehicle.
i need to know how change the rear shocks sombody can explain me with video please
To change the shocks on a Volvo 850, begin by safely lifting the vehicle and securing it on jack stands. Remove the rear wheels to access the shocks. Unbolt the top and bottom of each shock absorber using the appropriate socket and wrench, then replace them with new shocks, ensuring that they are tightened to the manufacturer's specifications. Finally, reattach the wheels, lower the vehicle, and perform a test drive to ensure everything is functioning properly.
You ought to be able to get at them from inside the truck.
Yes
The fuel filter on a 2000 S40 turbo is located under the driver side rear. It is close to the gas tank. The lines are held in place by squeze(sp) clamps. The filter is located behind the rear tire.
You can find a good tutorial at http://airsuspensionreviews.com
There is one down past the turbo unit on the exhaust pipe (front) then after the catalytic converter (under a plate that cover it and exhaust pipe you must remove 4 screws to get at the sensor) is the rear you will need the special socket as the rear is kinda hidden
The rear are shocks the front has struts. Rears shocks are a snap to change. Front struts should only be changed if you have the proper tools and knowledge as it can be dangerous.
I just don't. Take it to shop.
To change the rear shocks on a 2006 Hyundai Sonata, first, safely lift and secure the vehicle using jack stands. Remove the rear wheels to access the shocks. Then, unbolt the bottom and top mounting points of the shocks using the appropriate socket or wrench. Replace the old shocks with new ones, ensuring they are securely fastened, and reassemble the wheels before lowering the vehicle back to the ground.
To change the rear shocks on a 1999 Toyota 4Runner the rear of the vehicle must be lifted with the wheels removed. Find the shock mounts and remove those nuts as well as the lower fork hardware. Each shock will slide out in whole assemblies.
How do you replace rear shocks on a 2003 altima?