To fit a door window in a Fiat Punto, first, remove the door panel by unscrewing the fasteners and carefully prying it off. Next, detach the old window by unbolting it from the regulator and sliding it out. Position the new window in place, secure it to the regulator, and then reassemble the door panel by reversing the removal steps. Finally, test the window's operation to ensure it moves smoothly.
To turn a window into a door, you would need to remove the window and frame, enlarge the opening to fit a door, install a door frame, and then hang a door in the newly created space.
yes
yes, it will fit
To repair the rear window winder on a Fiat Punto Grande, first, remove the door panel by unscrewing any visible screws and carefully prying it off. Next, disconnect the window winder mechanism from the window and inspect it for any damaged components such as cables or gears. Replace any broken parts, reassemble the mechanism, and test the winder before reattaching the door panel. Ensure all connections are secure and the window functions properly before finishing the repair.
No
should be the same door and yes you should be able to eliminate the vent window as it just bolts in the door, I didn't think a 68 had a vent window.
To remove the window switch on a Fiat Punto front door, start by using a flathead screwdriver to gently pry off the trim panel surrounding the switch. Once the panel is removed, locate the screws securing the switch and unscrew them. Then, carefully disconnect the wiring harness attached to the switch. Finally, you can pull the switch out from its housing.
Punto wheels will not fit a 206. Punto wheels are 4x98. Check with your local tire dealer to find the correct tires for your vehicle.
it most certianly will!
The door will fit, but you may have trouble with the window reg, and bolting up the correct mirror.
To fit a Fiat Punto door mirror, first, remove the interior door panel by unscrewing any screws and gently prying it off to access the mirror's mounting area. Disconnect the electrical connector if your mirror is powered, then unscrew the old mirror from the door. Align the new mirror with the mounting holes, secure it with screws, reconnect the electrical connector, and reattach the door panel. Finally, test the mirror functions before finishing up.
no