To reset the service light on a Mazda 3, first, turn the ignition to the "On" position without starting the engine. Press the gas pedal three times within five seconds. Then, turn off the ignition and start the engine to check if the service light has been reset. If the light remains on, you may need to repeat the process or consult your owner's manual for specific instructions related to your model year.
Reset the change oil light on Mazda 3
I had the engine light come on in my patrol due to overheating and I had to take the vehicle to the dealer's service centre where they plugged it into the computer which advised why the light came on and then reset it. There was a minimal service fee for this. I assume it will be the same process for the Mazda.
Put the proper amount of air into the tires.
To reset the service light on a Discovery 3 TDV6, first, turn the ignition to the "ON" position without starting the engine. Press the accelerator pedal fully three times within ten seconds. After that, turn the ignition off and then back on. The service light should now be reset.
many service lights on the new 3 series you cannot reset yourself, this is a software error by BMW and they are aware of this but currently no fix is available, the only way to reset it is to have a BMW technician reset it with their special service equipment.
To fix a Mazda 3 ABS light 05 plate from staying lit you will need to see a dealer. They will need to use their computer to reset the code as long as the ABS light is faulty and not the actual ABS system.
In order to fix or reset a Mazda 3 ABS light when it stays lit, you will need a scanner in order to determine which system is faulty. It can be as simple as a dirty sensor, or more complicated as a computer module. Once you determine the issue, you can then take the proper course of action to solve the problem.
I have a 2004 Mazda 3 Maxx, and i get it serviced every 10,000 to 15,000kms, and then the 100,000kms service.
After service light appears, push reset button located behind steering wheel to the left next to mileage. Press reset button 3 times to select and confirm a service. The control arrows are located on steering wheel to the left.
To reset your service light here are the steps. 1. Get in your car and shut the door. 2. Put your key in the ignition 3. Turn your ignition key to position 1 4. Push in your Odometer reset button and hold it in while holding it move the ignition key to position 2 while holding down the odometer reset button. 5. After couple of seconds of holding the button down and the key in position 2 your service light will start to blink once that happens let go of the reset button and start the car. This should reset your service light and a service light on your Volvo C/S/V70 cars from 1999 onwards.
Try This Press and hold the trip reset button. Turn on the ignition while still holding the trip reset button you will hear the normal beeping noise. Hold trip reset button until the service tool (little spanner) disappears and 3 dashes appear (- - -). You can now release the button and the service interval/oil change light is reset Alison Bostock
i have a 2005 micra this is what i did to reset service light (spanner) (1)switch ignition on then (2) press and hold clock button for 3 secs (3) service indicator will flash (4) press clock repeatidly until you you get 00000 on clock wait 5 seconds and bingo its reset. turn ignition on, car stationary, go into maintenance/reminders, cant remember which, and until you ind a screen with service, reminder1 and reminder2. hold select on service until it fetches up a screen where you can reset it.