I have an Ibiza '96 and have just removed the side panel on passenger door. First you need to remove the screw caps on the latch/handle in the centre of the panel. Use a very thin screw driver at the edge of the caps. Remove the screws beneath the caps. Remove the speaker cover; there is a screw on the front corner edge of the door, just by the speaker. Once removed, the speaker itself can be removed by taking out the fixing screws. There is plug behind the speaker attaching it to the wiring. Dis-engage the plug. There are two large screws in the panel just by the speaker housing. Once these are removed I had to prise the panel from its retaining clips. I used a paper stripper so as not to inflict any heavy damage. It is this latter part that I'm not too sure about as I've not yet put the panel back. Hope this is helpful.
To remove the door panel of a Seat Ibiza you have to first take off the door trim. Then, take out the two large Philips screws at the handles and two screws on the torx head to release.
;how to remove drivers door panel to repair door restrictor
How do you remove the drivers door panel and fix the window. It fell off the track.
The 1998 Honda Civic drivers side door panel is held on by eight retaining clips. Pry outward on each retaining clip to remove the door panel.
Remove inner door panel for access
The drivers door panel has 12 retaining clips. Pry outward on each clip, one at a time. Remove the inside door handle retaining screws.
To remove the rear door lock on a 2002 Seat Ibiza, start by removing the door panel. This typically involves unscrewing any visible screws and gently prying off the panel to access the lock mechanism. Disconnect the wiring harness and remove any retaining clips or screws securing the lock in place. Finally, carefully pull the lock out of the door cavity.
To remove the driver's side door panel on a 2001 Holden Astra, first remove the covers for the speakers and any light lenses in the door. Then remove the door panel by inserting a screwdriver in the sides to loosen the clips.
Carefully
You can replace the inside drivers door handle by removing the door panel. With the door panel removed the door handle mechanism will be visible. Remove the linkage from the door handle. Remove the door handle retaining bolts. Reverse the process to install the new door handle.
How do you remove the inside driver's door panel on a 2000 Volvo S40?
You have to remove the door panel to gain access to the nuts and the wire inside the door. The door panel lifts up after the 3 screws are removed.