answersLogoWhite

0

The first and least expensive thing I would do is replace the turn signal flasher. If the flasher is weak, then it could act-up just as you have suggested. The turn signal flasher is a separate system then the four way or hazard flashers even though they use the same bulbs. Generally, the turn signal flasher (which simply plugs in) is located near the steering column but on your model I would suggest you purchase it from your dealer and ask them to print out the picture of the flasher which will show you it's location. I you. Mark

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

On my 99 neon sometimes indicator lights stay on steady sometimes flash the way they should Why?

When this happens, wiggle the turn signal stalk. If this fixes the problem, you need a new turn signal switch. Sometimes when you hit the brakes, the lights will come on. This is an indication of a bad switch.


Our ford pick up 1998 signal lights only work sometimes and sometimes it will come if you jiggle or turn off and on several times. What is the problem?

Bad switch inside the steering column.


Your brake lights come on sometimes but sometimes do not the tail lights work all the time and you have change the brake switch but still have the problem?

Had the same problem with a ford Contour. Turned out to be a loose connection on the turn signal switch. remove top trim from steering column and dsisconnect and re-connect connectors. Good luck.


Problems with 2000 Mazda 626 on lights signal?

You should clarify your problem or question. Is it the front or rear signal light? Is the tail light coming on with the signal light? Are none of the lights coming on at all?


I have a turn signal problem on my 97 Jeep Cherokee. The drivers side turn signal works but the dash board lights also flash. When the head lights are turned on the right turn signal does not work.?

That sounds like a grounding problem, probably near the right side lights. It might be a rusty or disconnected ground wire.


How do you replace a turn signal lamp control module for a Audi 2001 A6 Quattro The lights all work when i turn on my hazards just when i use the swithch there is nothing. They blink once then turn?

you need to replace the hazard light switch the turn signal control module is built in the hazard switch.just had same problem a few months ago.


Why does the turn signal start and stop on your 2002 Audi Quattro?

The turn signal on your 2002 Audi Quattro may start and stop due to a few common issues. One possibility is a faulty turn signal relay, which controls the blinking of the lights and may need replacement. Another reason could be a poor connection or a burned-out bulb, which can disrupt the signaling function. Additionally, the turn signal switch itself may be worn or malfunctioning, affecting its operation.


2001 Chevy Cavalier hazards lights flash but blinkers do not work is it the turn signal bulbs that need to be replaced or the flasher?

If neither signal light works, the flasher may very likely be the problem. The hazard lights and the signal lights work off different flashers.


Signal lights not working?

signal lights not working.


What if your turn signal lights stays on?

electrical problem. bring it to a mechanic they have all the tools to fix it


Why don't your turn signal lights work in my 1991 Isuzu pickup?

Most common problem --turn signal flasher needs replacement Could also be a problem in steering column


Where can you find the fuse to signal lights on my 1994 ford explorer?

Check flasher most common problem