Distributor
Disconnect the battery, and remove the spark plug wires one by one. Replace the spark plug wires in the same order, ensure the connection is firm, and connect the battery.
Disconnect the battery, remove the spark plugs wires and boots and remove the spark plugs. Put in the spark plugs, replace the spark plug wires and boots, and connect the battery.
Both, each spark plug has it's own coil pack that creates the spark, and a wire to connect it to the plug.
At the end of the plug wires that don't connect to the spark module.
Disconnect the battery, remove the spark plug wires and boots, and remove the old spark plugs. Toss out the old spark plugs, put in the new spark plugs, replace the spark plug wires and boots, and connect the battery.
Alphabetical
Disconnect the battery, remove the spark plug wires and boots, and remove the old spark plugs. Dispose to the old plugs, put in the new spark plugs, replace the spark plug wires and boots, and connect the battery.
No, not unless your connect the plug wires wrong or one of the new spark plugs was bad.
The Wires are of different lengths. the shorter cable will connect to the closest plug and the longer cable to the outer plug. technically since they both run off the same coil they will ignite at the same time.
Disconnect the wires to the battery, remove the spark plug cables and boot covers, and remove the old spark plugs. Next, put in the new spark plugs, attach the boot covers and spark plug cables and reconnect the wires to the battery posts.
A 2000 Concorde does not have plug wires. There are individual coils on each spark plug.A 2000 Concorde does not have plug wires. There are individual coils on each spark plug.
you get a spark plug socket or one of similar size to fit the spark plugs, then you just put it in the correct location and screw it in snuggly(not too tight cause you will break the ceramic casing), then connect all the spark plug wires