That'd be a motor with a 90.5 mm stroke and 69 mm bore.
The Bore of a 350 cid engine is 4.00, the stroke is 3.48 inch..
bore is the diameter of the piston and stroke is the length the piston moves in the cylinder.for example if bore x stroke is 1x3 then 1 is the diameter of the piston and 3 is the length of the cylinder.if bore is greater than stroke then it is a short stroke engine.
It refers to the throws of the crankshaft/distance the piston moves. It usually is compared to the bore of the engine. An example a 302 4"bore x 3"stroke is a short stroke motor, by comparison a 5.4L ford v8 3.552" bore x 4.165" stroke.
The bore and stroke of a 406 small block Chevy (SBC) engine typically measure 4.125 inches for the bore and 3.80 inches for the stroke. This combination allows the engine to displace 406 cubic inches, making it a popular choice for high-performance applications. The larger bore and stroke contribute to enhanced power and torque characteristics.
Enlarging the cylinder bore will increase cc's in a 2 stroke and ci's ina 4 stroke.....
.7853x bore x bore x stroke x #of clyinders
Oversquare
Bore = the (internal) diameter of the cylnder hole in the engine block. Stroke = the distance the piston travels up (or down) the bore during its' cycle. If you multiply the bore dimension by the stroke dimension you will get the volumetric displacement of that cylinder. thus, Vd = (3.1416/4) (dia.) squared x Stroke
The bore and stroke.
427 = 4.250" x 3.76"
3.48 inches.
945.7975296 mm3