0
Look at engine from front, cam shaft on left hand side,centre bolt back is no 1. centre bolt front is 2, left hand side back is 3, left hand side front is 4, right hand side back is 5, right hand side front is 6, far left hand sideback is 7
, far lft hand side front is 8, far right hand side back is 9 , far righthandside front is 10
What else can I help you with?
Tell me what the bolt tightening sequence is on an inline Chevy 2 nova?
bolt tightening sequence on what part?
What is the bolt tightening sequence for 48 hole flange?
48 hole bolt tightening seqence
What is the head gasket bolt tightening sequence?
Get a Haynes Manual, A Chilton Manual. You can get them at Autozone, Advance Auto, or Napa. They Run under $20. And they are very helpful.
Cylinder head bolt tightening sequence Toyota tercel 1.5?
head bolt sequence Toyota tercel
Chevy 3.4 head bolt loosening sequence?
No such thing, just remove them. However there is a sequence to tightening them.
Cylinder head tightening sequence 1990 Toyota Cressida?
Pls let me know the cylinder head bolt tightening sequence for toyota cressida mx83
Who created the proper bolt tightening sequence or star pattern method?
Engineers.
What is fiat punto head bolt tightening sequence and torque?
It is important to know the head bolt tightening sequence and the torque of a vehicle. For the Fiat Punto it is 20nm, 30nm, 90 degree turn, 90 degree turn, then in order 8,6,2,5,10,7,3,1,4,9.
Honda d15b2 head Tightening Sequence?
The Honda had bolt tightening sequence begins with the head bolts on each end of the head. Tighten the head bolts moving to the center, alternating from and to end.
What is the 4G13 P SOHC cylinder head bolt torque specs?
Tighten the bolt in the sequence until each is torqued to 49 Nm, then completely loosen all the bolt then re-tighten them in sequence once again until each torqued 20 Nm. tighten each bolt again by 90 degree in accordance with the tightening sequence. After that tighten each bolt again by 90 degree in accordance with the tightening sequence. Some mechanics will refer this method as "20+90deg+90deg"
Cylinder head tightening sequence for Vauxhall Vectra?
The cylinder had bolt tightening sequence should begin by tightening the head bolts on each end of the head. Tighten the center head bolts. Work towards each end of the head, alternating back and forth.
How much do you torque your intake manifold bolts on your 6.0?
First step is 44in-Lbs . Second step is 89 in-Lbs. there is also a bolt tightening sequence you must follow for proper gasket sealing usually start from center one side then opposite side center and works from niddle out be get the chart it comes with gasket set
