i suggest not replacing the pump, but installing an inline pump. you only need about 7 psi of pressure. so a $40 pump form an auto parts store will do the trick. you only need a few hoses, and some electrical wiring and your done. a 20 min job at the most.
1985 Volvo!
1985 Ford F-150 brake light bulb lamp replacement procedure: Purchase the correct replacement brake light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement brake light bulb information. Then consult your owner's manual for the replacement procedure. As simple as it sounds, the owner's manual is the best place to start for brake light bulb lamp replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
Is it an inline or tank?
# 1 is the front cylinder
clockwise
When working on anything electrical, a person should have a diagram. The diagram for the alternator wiring for a 1985 Volvo 240 can be found in its maintenance manual.
10w3010w30
.028
$200
To replace the high beam relay in a 1985 Volvo 240 DL, first, locate the relay panel, which is typically found under the dashboard on the driver's side. Remove the old relay by pulling it straight out of its socket. Insert the new relay firmly into the same socket, ensuring it is seated properly. Finally, test the high beams to confirm that the replacement was successful.
1985 BMW 735i tail light bulb replacement: Purchase the correct replacement tail light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the tail light bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).