Hope
Hope
The top of a box might be a lid. If there is no lid, there may be flaps.
Here are some sentences.She clamped the pipe in the vice to work on it.The lid was clamped shut on the box.
it just stayed there, since she shut the lid on t, so it couldn't get out, like the evils did
The Plastic box and lid shop
you don't need a diagram for this. open your hood and look for the rectangular black box located behind the battery. open the top of it and the diagram in the lid will show the auto shut/ relay. you don't need a diagram for this. open your hood and look for the rectangular black box located behind the battery. open the top of it and the diagram in the lid will show the auto shut/ relay.
Make a box within a box. First make a small box and a lid out of cardboard, line the inside with aluminum foil, don't forget the lid. Use duck tape to keep the lid on tight. Now make another, larger box just like the first one with foil too that the small box fits inside and leave a gap of a inch on all sides, top and bottom. Fold a couple pieces of the cardboard to make a stand that the little box sits on. Tape the lid shut.
you should only close the lid if you shut it down you are just going to make it harder for you
he shut the toilet lid when he was done
The force required to remove a lid from an airtight box depends on factors like the tightness of the seal, friction between the lid and the box, and any external factors like vacuum pressure or suction. Generally, a sufficient force must be applied to overcome these factors and break the seal for the lid to be removed.
measure the sides of the box
A cardboard file with a lid that opens like a box.