In a 1994 Volvo 940, the relay switch is typically located in the engine compartment fuse box, which is found on the driver's side near the battery. The specific relay for the fuel pump can often be identified by its label on the fuse box cover. Additionally, there may be other relays in the same area for various electrical components, so consulting the owner's manual for exact locations can be helpful.
The fuel pump reset switch in a 1994 Volvo 940 is located under the hood. The relay will be in the fuse box.
It should be behind the glove box, if applicable.
Location ac compressor relay 940 volvo
The inertia switch on a 1994 Volvo 940 is typically located in the trunk area, near the rear passenger side. It is often mounted on the side wall or near the fuel pump relay. The switch is designed to cut off the fuel supply in the event of an accident, and it can be reset by pushing the button on top of the switch. Always refer to the vehicle's service manual for the exact location and instructions.
The switch is on the shift knob. There is also a relay and solenoid. The most common problems are * Bad solder joints in the relay * broken wires at the switch * broken wires at the solenoid * bad solenoid For more info on OD problems go to http://www.brickboard.com/FAQ/700-900/ It is the ultimate Volvo 940 DIY site.
you do not have a relay for a fan belt. just change them.
by changing it.
Behind the ashtray--google "Volvo 940 overdrive relay" for detailed answers on how to get to it. It's beyond the fuse panel, the white one with black print on the right.
The heater/AC fan has no relay just a switch. The Radiator fan relay is mounted next to the battery. It has 2 plugs and starts based on radiator temp and AC pressure.
yes and ignition relay would..
In the 1994 Volvo 940, the relay for the 4th gear is typically located in the engine compartment, specifically in the relay/fuse box. This box is situated near the driver's side fender. To identify the correct relay, refer to the diagram on the cover of the relay box for the specific layout and labeling. If you need to replace it, ensure the vehicle is turned off and take appropriate safety precautions.
Check the bulbs, check the fuse, check the brake light switch, in that order.