If the brakes still make noise after replacing the pads and rotors on a 1992 Volvo 240, it could be due to several factors. One possibility is that the new pads and rotors are not properly bedded in, which can cause squeaking or grinding sounds. Additionally, if there is dirt, debris, or moisture on the braking surfaces, it can also lead to noise. Lastly, worn or damaged components like calipers or hardware may still be causing the noise despite the new parts.
There can be. Only way to know is have your brakes and rotors inspected.
When brakes get wet, the water can cause friction between the brake pads and rotors, leading to noise.
Volvo pads and rotors are the best ones to use. Most aftermarket pads and rotors seem to make braking noise
Effectively, your new brakes need to "break in." Your old brakes, before they started making noise matched your rotors. Any tiny grooves that may have developed, or other abnormalities, matched the pads. Your new brake pads and/or rotors simply need to match up, after a few days you should notice the noise going away. Other causes of this can be brake dust, rust on the rotors, replacing just the pads with really old rotors or improper installation. If your new brakes are making noise, don't worry, but if the noise doesn't go away in at least a week, or if you experience any reduction in braking performance, call your mechanic right away.
usually it will to the brake pads wear a little or it could be your rotors
Could be a drive belt or brake warning device. Check your belts, and have your brakes inspected. More than likely this is your brakes. There is a metal warning device that will make a noise like you describe when the pads wear to a certain point. This indicates they need replacing. Ignore this warning and you will ruin the rotors.
To reduce or eliminate the squealing noise from your disc brakes, you can try cleaning the brake pads and rotors, adjusting the brake calipers, or replacing the brake pads with high-quality ones. If the issue persists, it may be best to consult a professional mechanic for further assistance.
The brakes may make a clicking noise if the caliper is going bad. I just changed the brakes and the rotors and discovered my car was making a clicking noise. The garage I took it to replaced the caliper, so now it doesn't make the noise anymore.
Probably scoured or warped rotors.
The grinding noise is from the the pads being gone and rotors being grinded away. Unless it was just some rust on the rotors from sitting for days.
If you hear the squealing when applying the brakes, the pads are worn out and need replacing ASAP. Failure to replace the pads immediately will result in worn out rotors which will also need replacing. If the squealing noise is not when braking it may be a worn drive belt.
The most likely problem is warped rotors. Have rotors turned or replaced. Replace front brake pads.