Some do
how to loosen a tight nut
A nut is called screw when its head is tightend in component .but in case, tight of nut is not possible without bolt.since screw is tight without nut bolt it is not possible in case of nut.
yes
generally the spindle nut needs replacing when you remove the nut. the new nut has a nylon locking ring on it, that is only designed to stay tight one time. once this is removed the nut will not stay tight with a second application The nut is a torque to yield design. After reaching torque specs, the threads have stretched. Reusing the nut will allow the nut to back off, since you can't properly torque it but one time.
tight.. like really tight but not too tight.. like 75-90ftlb..
Ideally, you want the spindle nut to hold the bearing pack together. Too tight and your bearings wear faster. WAY too tight and the bearings crush. Too loose and the bearings chatter. WAY too loose and the wheel wobbles.
Tight......like 200ftbls tight I get a long breaker bar and stand on it a touch.
It all depends on the guy. some guys don't like it tight but others don't.
There is no "middle nut" on a tire. -I can only assume you may mean the 'spindle nut' or 'main wheel bearing nut'. That is what holds your wheel bearing tight to the CV joint. In 94 Taurus it is a 1 and 1/4 nut
Tight pants and a lot of exposur !!! Tight pants and a lot of exposur !!!
They normally like it when you wear tight clothes like leggings or a tight lycra top
It all depends on the guy. Some prefer them tight, others prefer them loose.