on a 91 blazer s10 4wd
It has a hydraulic clutch system
If its like my 91 pull the fuse by the AC unit on the passengers side under the hood.
where do you add clutch fluid to 1999 nissan maxima
Bulb in dash or sensor at t-case.
That depends. it is 2wd or 4wd ? My 91 Ranger is an XLT model with 4wd and the sticker on the door says P215/75/R15 S. Open the drivers side door and look for the sticker. It will tell you what size tire is recommended for your truck.
It may be as simple as an auto adjustment. If you have installed a new clutch/ clutch cable. If it is auto adj all you have to do is lift UP on the clutch pedal with your foot while driving.
To replace the clutch on a 1991 Suzuki Sidekick JX 4WD, you typically need to drop the transmission to access the clutch assembly. This involves removing the driveshaft, exhaust components, and various transmission mounts. While some may attempt to access the clutch without fully dropping the transmission, it's generally recommended to remove it completely for proper alignment and installation of the new clutch. Always consult a repair manual for specific steps and safety precautions.
Changing the clutch on a 1999 Chevy Cavalier requires remove of the transmission. Once the unit is dropped. Access and loosen the flywheel bolts. Then remove the clutch dish bolts. Pull the clutch off. Installation and reversal of the removal, just be sure the properly bleed the clutch system.
There is no way 2 adjust the clutch. The only way is 2 replace them. Clutch & pressure plate & throw out bearing, replace them all in one shot!!
Should be on the upper end of the clutch pedal under dash area
check your clutch fluid lines and your clutch fluid and also bleed the clutch and it should work just fine mine did the same thing and i had to replace a clutch line that was pinched