The molar mass of sodium chloride is 58.5 g/mole. Thus You would have to dissolve 25 * 58.5 g/l to obtain a 25 M NaCl-solution.
The 1462,5 g/l are far beyond the solubility limit of 360 g/l for sodium chloride in water which means that under standard conditions such a solution is not possible. After saturating the solution with 360 g/l of NaCl there would still be 1102,5 g/l of crystalline NaCl left.
5000 grams, the same as 5 kg.5000 grams, the same as 5 kg.5000 grams, the same as 5 kg.5000 grams, the same as 5 kg.
Assuming each 500ml bottle of water weighs around 500 grams (since 1 ml of water is approximately 1 gram), the total weight of 40 bottles would be approximately 20,000 grams or 20 kilograms.
The solubility of potassium chloride in water is approximately 34 grams per 100 grams of water at room temperature. Therefore, in 200 grams of water, the maximum amount of potassium chloride that can dissolve would be around 68 grams.
Approximately 30.4 grams of potassium chloride would dissolve in 100 cm3 of water at room temperature.
The solubility of barium carbonate (BaCO3) in water is very low, approximately 0.0002 grams per 100 mL at room temperature. Therefore, in 1000 mL of water, about 0.002 grams of BaCO3 would dissolve. This indicates that BaCO3 is not soluble in water and will mostly remain undissolved.
The minimum amount of water required to dissolve 5 grams of magnesium sulfate would be approximately 72 mL at room temperature (25°C).
Solubility increases with temperature, but the solubility of sodium chloride in water is 316 grams per litre at 0 degrees Celsius, and 330 grams per litre at 70 degrees Celsius. Since room temperature is somewhere between these two, this gives upper and lower limits of the solubility at room temperature. 50 grams of water has a volume of 50 cubic centimetres, or 0.05 litres. In one litre you could dissolve between 316 grams and 330 grams, so in 0.05 litres you could dissolve between 15.8 and 16.5 grams, where 15.8 = 316 x 0.05 and 16.5 = 330 x 0.05. So we can say it's around 16 grams of NaCl in 50 grams of water at room temperature.
To make a liter of water, you would need two 500ml bottles of water. This is because 1 liter is equivalent to 1000ml. Therefore, two 500ml bottles combined would give you a total of 1000ml or 1 liter of water.
To determine the total mass of 1-pentanol that will dissolve in 110 grams of water to produce a saturated solution, you would need to know the solubility of 1-pentanol in water at a specific temperature. Once you have that information, you can calculate the total mass of 1-pentanol that will dissolve by adding the mass of the water to the mass of the 1-pentanol that can dissolve in it to form a saturated solution.
No, 500 grams of buttermilk is not equal to 500 milliliters. The density of buttermilk is slightly less than that of water, typically around 1.03 grams per milliliter. Therefore, 500 grams of buttermilk would be approximately 485 milliliters.
To find the temperature in kelvins required to dissolve 400 grams of sugar in 100 grams of water, you would typically refer to solubility data for sugar in water. This data indicates how much sugar can dissolve at various temperatures. Since solubility increases with temperature, you would need to heat the water until the desired amount of sugar fully dissolves. The final temperature in kelvins can be calculated by adding 273.15 to the Celsius temperature obtained from the solubility data.
26.8125 g