0
What else can I help you with?
How many btu needed to heat 625 sq feet?
btus needed to heat & cool 625sf room
How many btus does it take to heat up one gallon of water?
That depends on what the starting temperature of the water is,and what temperature you want it to reach.If you expect to get a number, you must first give the necessary numbers.
Is it the same BTUs to cool a house as it is to heat a house?
No, the amount of BTUs needed to cool a house is different from heating it. Cooling typically requires fewer BTUs because it involves removing heat from the indoors to maintain a lower temperature, while heating involves adding heat to raise the temperature.
How many btus to heat a hot tub?
The number of BTUs required to heat a hot tub depends on its size, the desired temperature increase, and the ambient temperature. On average, it takes about 4-6 BTUs to raise the temperature of one gallon of water by one degree Fahrenheit. For example, heating a 400-gallon hot tub from 50°F to 100°F would require approximately 80,000 to 120,000 BTUs, depending on the specific conditions. Always consider factors like heat loss due to evaporation and wind when estimating heating needs.
How many btus are needed to heat a sixty square foot room?
The number of BTUs needed to heat a room can vary based on factors like insulation, ceiling height, climate, etc. As a rough estimate, you can use the formula: 20 BTUs per square foot for a room with standard ceiling height. Therefore, for a 60 square foot room, you would need around 1,200 BTUs to heat it effectively.
How many BTUs is needed to heat to 70 degrees?
The number of BTUs needed to heat a space to 70 degrees will depend on factors such as the size of the space, insulation levels, outdoor temperature, and efficiency of the heating system. A general estimate is around 25-30 BTUs per square foot. It is recommended to consult a heating professional for a more accurate calculation.
How many BTUs will it take to change 1 gallon of water at 32 degrees to ice at 32 degrees?
You would need to remove approximately 1200 BTUs of heat to convert a gallon of water to ice. There are 8.34 lb in a gallon of water, which converting to lb-moles is 0.463. The latent heat of crystallization for water is -2583.4 BTU/lb-mole. Multiplying the two together and you get -1197 BTUs, which means you need to remove that amount of heat to convert the gallon of water to ice.
How many BTUs are in a gallon of propane?
Type your answer here... there are around 91,600 BTUs in a gallon of propane. The standard BBQ sized bottle of propane contains 11 pounds of propane. Propane weighs about 4.2 pounds per gallon, so that 11 pounds of propane is about 2.5 gallons in its liquid state. That means there is 91,600 BTUs/Gal times 2.5 gallons so a BBQ sized tank of propane contains about 2.3 million BTUs. If your BBQ has a 50,000 BTU burner, on high heat, it will last a bit over 4 and half hours of run time.
How many therms to heat one gallon of water 50 degrees?
To heat one gallon of water by 50 degrees Fahrenheit, you need approximately 0.2 therms of energy. This is based on the fact that it takes about 8.33 BTUs to raise the temperature of one gallon of water by one degree Fahrenheit, totaling around 416.5 BTUs for a 50-degree increase. Since one therm is equivalent to 100,000 BTUs, the calculation gives you about 0.00416 therms per degree, resulting in roughly 0.2 therms for the total increase.
How much gas does it take to heat a gallon of water?
Heating a gallon of water by one degree Celsius requires around 8,337 BTUs (British Thermal Units) of energy. Since 1 cubic foot of natural gas produces about 1,031 BTUs, you would need roughly 8 cubic feet of natural gas to heat a gallon of water by one degree Celsius.
How many BTUs does it take to heat 390 gallon tank of water from 60 degrees to 248 degrees?
The specific heat of water is 1 BTU per pound per degree Fahrenheit. There are 8.3378 lbs/gallon at 60 degrees, which equals 3251.742 pounds of water. The number of BTUs to raise it 188 degrees is then 611,327.496 BTUs.
How many btus are needed to heat one lb of water one hundred degrees?
100 BTU if it's Fahrenheit
